29 Aug
2016
29 Aug
'16
9:41 p.m.
Hi,
I updated the Pillar support in GTInspector. Some of the extensions already exist in the
default Pillar #development version. If you want to play with the full support, you can
load it like this:
Gofer new
smalltalkhubUser: 'Moose' project: 'PetitParser';
package: 'PetitAnalyzer';
package: 'PetitIndent';
package: 'PetitIslands';
smalltalkhubUser: 'Moose' project: 'GToolkit';
package: 'GT-InspectorExtensions-Pillar';
load
Then you can just inspect a book folder and you get this:
I did not integrate this in the main Pillar yet because this is an older implementation
based on a limited island parser. As now Pillar has a full parser based on PetitParser,
the next step is to move the highlighting logic to use this parser instead of the island
parser. From my measurements, the speed of the two parsers is about the same, so from a
user perspective there will be not much changes.
It pains me that we are editing Pillar in outside tools, and now we should no longer have
to do that. Of course, this is not the most ideal tool support for Pillar but I think it
is a reasonable start.
Cheers,
Doru
--
www.tudorgirba.com
www.feenk.com
"Problem solving should be focused on describing
the problem in a way that makes the solution obvious."
29 Aug
29 Aug
9:47 p.m.
On 29 Aug 2016, at 21:41, Tudor Girba
<tudor(a)tudorgirba.com> wrote:
Hi,
I updated the Pillar support in GTInspector. Some of the extensions already exist in the
default Pillar #development version. If you want to play with the full support, you can
load it like this:
Gofer new
smalltalkhubUser: 'Moose' project: 'PetitParser';
package: 'PetitAnalyzer';
package: 'PetitIndent';
package: 'PetitIslands';
smalltalkhubUser: 'Moose' project: 'GToolkit';
package: 'GT-InspectorExtensions-Pillar';
load
Then you can just inspect a book folder and you get this:
<inspector-pillar.png>
Cool!
I did not integrate this in the main Pillar yet because this is an older implementation
based on a limited island parser. As now Pillar has a full parser based on PetitParser,
the next step is to move the highlighting logic to use this parser instead of the island
parser. From my measurements, the speed of the two parsers is about the same, so from a
user perspective there will be not much changes.
It pains me that we are editing Pillar in outside tools, and now we should no longer have
to do that. Of course, this is not the most ideal tool support for Pillar but I think it
is a reasonable start.
To make things sadder: when I need to write some short “richish" I’m using markdown
instead for pillar because in ATOM I can open the rendered version of my document that
will update while i type (and will display images and so on). It could be nice to have the
same functionality in Pharo, but I’m really busy with improving other parts. Additionally
I’m not sure that it makes sense to reimplement rich text editor in Pharo.
Uko
Cheers,
Doru
--
www.tudorgirba.com <http://www.tudorgirba.com/>
www.feenk.com
"Problem solving should be focused on describing
the problem in a way that makes the solution obvious."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)list.inf.unibe.ch
https://www.list.inf.unibe.ch/listinfo/moose-dev
30 Aug
30 Aug
4:33 p.m.
New subject: [Pharo-dev] [ann] pillar support in gtinspector
Hi!
Having a spell checker would be fantastic… Any chance to have this?
Alexandre
On Aug 29, 2016, at 4:41 PM, Tudor Girba
<tudor(a)tudorgirba.com> wrote:
Hi,
I updated the Pillar support in GTInspector. Some of the extensions already exist in the
default Pillar #development version. If you want to play with the full support, you can
load it like this:
Gofer new
smalltalkhubUser: 'Moose' project: 'PetitParser';
package: 'PetitAnalyzer';
package: 'PetitIndent';
package: 'PetitIslands';
smalltalkhubUser: 'Moose' project: 'GToolkit';
package: 'GT-InspectorExtensions-Pillar';
load
Then you can just inspect a book folder and you get this:
<inspector-pillar.png>
I did not integrate this in the main Pillar yet because this is an older implementation
based on a limited island parser. As now Pillar has a full parser based on PetitParser,
the next step is to move the highlighting logic to use this parser instead of the island
parser. From my measurements, the speed of the two parsers is about the same, so from a
user perspective there will be not much changes.
It pains me that we are editing Pillar in outside tools, and now we should no longer have
to do that. Of course, this is not the most ideal tool support for Pillar but I think it
is a reasonable start.
Cheers,
Doru
--
www.tudorgirba.com <http://www.tudorgirba.com/>
www.feenk.com
"Problem solving should be focused on describing
the problem in a way that makes the solution obvious."
6 Sep
6 Sep
4:56 p.m.
New subject: [Pharo-users] [ann] pillar support in gtinspector
2016-08-29 21:41 GMT+02:00 Tudor Girba <tudor(a)tudorgirba.com>om>:
Hi,
I updated the Pillar support in GTInspector. Some of the extensions
already exist in the default Pillar #development version. If you want to
play with the full support, you can load it like this:
Gofer new
smalltalkhubUser: 'Moose' project: 'PetitParser';
package: 'PetitAnalyzer';
package: 'PetitIndent';
package: 'PetitIslands';
smalltalkhubUser: 'Moose' project: 'GToolkit';
package: 'GT-InspectorExtensions-Pillar';
load
Then you can just inspect a book folder and you get this:
I did not integrate this in the main Pillar yet because this is an older
implementation based on a limited island parser. As now Pillar has a full
parser based on PetitParser, the next step is to move the highlighting
logic to use this parser instead of the island parser. From my
measurements, the speed of the two parsers is about the same, so from a
user perspective there will be not much changes.
It pains me that we are editing Pillar in outside tools, and now we should
no longer have to do that. Of course, this is not the most ideal tool
support for Pillar but I think it is a reasonable start.
Cheers,
Doru
nice!
I just played a bit with the code to apply larger different font sizes for
the headings and
use the code styler for inlined code ("==").
Maybe we should use a different code styler or add a way to instruct the
styler to ignore unknown classes or uknown selectors :)
--
www.tudorgirba.com
www.feenk.com
"Problem solving should be focused on describing
the problem in a way that makes the solution obvious."
14 Sep
14 Sep
10:47 p.m.
New subject: [Pharo-users] [ann] pillar support in gtinspector
Hi Nicolai,
Did you commit your changes with the highlight of == code?
Cheers,
Doru
On Sep 6, 2016, at 4:56 PM, Nicolai Hess
<nicolaihess(a)gmail.com> wrote:
2016-08-29 21:41 GMT+02:00 Tudor Girba <tudor(a)tudorgirba.com>om>:
Hi,
I updated the Pillar support in GTInspector. Some of the extensions already exist in the
default Pillar #development version. If you want to play with the full support, you can
load it like this:
Gofer new
smalltalkhubUser: 'Moose' project: 'PetitParser';
package: 'PetitAnalyzer';
package: 'PetitIndent';
package: 'PetitIslands';
smalltalkhubUser: 'Moose' project: 'GToolkit';
package: 'GT-InspectorExtensions-Pillar';
load
Then you can just inspect a book folder and you get this:
<inspector-pillar.png>
I did not integrate this in the main Pillar yet because this is an older implementation
based on a limited island parser. As now Pillar has a full parser based on PetitParser,
the next step is to move the highlighting logic to use this parser instead of the island
parser. From my measurements, the speed of the two parsers is about the same, so from a
user perspective there will be not much changes.
It pains me that we are editing Pillar in outside tools, and now we should no longer have
to do that. Of course, this is not the most ideal tool support for Pillar but I think it
is a reasonable start.
Cheers,
Doru
nice!
I just played a bit with the code to apply larger different font sizes for the headings
and
use the code styler for inlined code ("==").
Maybe we should use a different code styler or add a way to instruct the styler to ignore
unknown classes or uknown selectors :)
--
www.tudorgirba.com
www.feenk.com
"Problem solving should be focused on describing
the problem in a way that makes the solution obvious."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)list.inf.unibe.ch
https://www.list.inf.unibe.ch/listinfo/moose-dev
--
www.tudorgirba.com
www.feenk.com
"Obvious things are difficult to teach."
15 Sep
15 Sep
11:13 a.m.
New subject: [Pharo-users] [ann] pillar support in gtinspector
2016-09-14 22:47 GMT+02:00 Tudor Girba <tudor(a)tudorgirba.com>om>:
Hi Nicolai,
Did you commit your changes with the highlight of == code?
Cheers,
Doru
No, but I just saw that I misinterpreted the "==", first I thought this is
for "inline code" as it was used in some class comment like that.
But it is actually a more general formatting tag for "monospaced font" -
we actually don't need to do code highlighting for this text, just use a
monospace font resp. code font.
On Sep 6, 2016, at 4:56 PM, Nicolai Hess
<nicolaihess(a)gmail.com> wrote:
2016-08-29 21:41 GMT+02:00 Tudor Girba <tudor(a)tudorgirba.com>om>:
Hi,
I updated the Pillar support in GTInspector. Some of the extensions
already exist
in the default Pillar #development version. If you want to
play with the full support, you can load it like this:
Gofer new
smalltalkhubUser: 'Moose' project: 'PetitParser';
package: 'PetitAnalyzer';
package: 'PetitIndent';
package: 'PetitIslands';
smalltalkhubUser: 'Moose' project: 'GToolkit';
package: 'GT-InspectorExtensions-Pillar';
load
Then you can just inspect a book folder and you get this:
<inspector-pillar.png>
I did not integrate this in the main Pillar yet because this is an older
implementation based on a limited island parser. As now Pillar has a full
parser based on PetitParser, the next step is to move the highlighting
logic to use this parser instead of the island parser. From my
measurements, the speed of the two parsers is about the same, so from a
user perspective there will be not much changes.
It pains me that we are editing Pillar in outside tools, and now we
should no
longer have to do that. Of course, this is not the most ideal
tool support for Pillar but I think it is a reasonable start.
Cheers,
Doru
nice!
I just played a bit with the code to apply larger different font sizes
for the
headings and
use the code styler for inlined code
("==").
Maybe we should use a different code styler or add a way to instruct the
styler to
ignore unknown classes or uknown selectors :)
--
www.tudorgirba.com
www.feenk.com
"Problem solving should be focused on describing
the problem in a way that makes the solution obvious."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)list.inf.unibe.ch
https://www.list.inf.unibe.ch/listinfo/moose-dev
--
www.tudorgirba.com
www.feenk.com
"Obvious things are difficult to teach."
2872
days inactive
2889
days old
5 comments
4 participants
participants (4)
-
Alexandre Bergel -
Nicolai Hess -
Tudor Girba -
Yuriy Tymchuk