23 May
2009
23 May
'09
12:11 p.m.
Hi,
The main problem is not the latency, but is a corrupt DB entry of the
CodeFoo bundle. It's a long story :).
Enough to say that if you even try to browse CodeFoo from the
Published Items, you will get an infinite loop. So, because I am not
knowledgeable enough to patch the DB, the workaround is found in the
HackToLoadCodeFooInVW76 package from the SCG Store. This basically
patches the read from the DB to not take into account the faulty data.
By mistake this was indeed not a prerequisite of MooseDevelopment, but
only in Moose Config, and that is why loading Moose Config worked but
loading directly MooseDevelopment took forever :).
Anyway, I fixed it now (added the needed prerequisite to
MooseDevelopment). Please try again and let me know if it works.
Cheers,
Doru
On 23 May 2009, at 11:20, Toon Verwaest wrote:
Mircea: there's a different problem in Argentina:
latency. Does VW
really make connections for each file it tries to download? The
network over there goes at around 50kb/s but even then I do remember
Moose to take about 3 hours to install on an empty image. And then I
was told to reinstall it every day ...
No to make it workable they should have their own synced version over
there I think; or like you said, through image sharing rather than by
using the repo.
On (21/05/09 23:05), Mircea Lungu wrote:
--
www.tudorgirba.com
"Being happy is a matter of choice."
From: Mircea Lungu
<mircea.lungu(a)lu.unisi.ch>
To: "arevalo(a)iam.unibe.ch" <arevalo(a)iam.unibe.ch>ch>,
Related to the development of Moose and other related tools
<moose-dev(a)iam.unibe.ch>
Cc: Diego Kogan <diegokogan(a)gmail.com>
Subject: [Moose-dev] Re: Help to access to Moose-Development
Date: Thu, 21 May 2009 23:05:24 +0200
Ciao Gabriela,
Did you try to load Moose Config? I remember that at one point I
tried
to load MooseDevelopment itself and it seemed to take a very long
time.
Alternatively, you can download the latest image of Softwarenaut, you
will have also the latest version of Moose Development included (as
it
they are loaded by Moose Config 1.28). You find it at
http://www.inf.unisi.ch/phd/lungu/softwarenaut/download/resources/snaut-3.3…
Cheers,
Mircea.
On May 21, 2009, at 4:25 PM, Gabriela Arevalo wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi Guys (in Bern),
How are you? I hope everything is ok.
With Diego (cc in this email) we are trying to download the package
Moose-Development from the UniBeStore.
Unfortunately our 15000 km far from Bern :) are not an advantage for
us
(we tried from different connections: univ, private from our home,
but
we are stuck when we tried to load the package).
Two solutions come to my mind:
1) How different is the moose version published in the
distribution of
VW NC from the version in developement in Bern?
If no big differences, we can work with that one
2) Second option: we need a caritative soul :) that loads
moose-development in a clean image and upload the image (with
moose-development) temporarily in a website where we can download it
...
Anyway, we are open to suggestions to our nice problem ... :)
thanks for any tip or information ...
Cheers,
Gabi
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev