3 Dec
2010
3 Dec
'10
8:01 p.m.
Hi!
I am still struggling to make Moose work on a Pharo 1.1.1. When you execute:
((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load
You end up with an error:
-=-=-=-=-=-=-=-=-=-=-=-=
Warning: This package depends on the following classes:
MalTarjanNode
MalGraphNode
MOCycleTable
MalCyclesCoverage
You must resolve these dependencies before you will be able to load these definitions:
DSMCycleTable
DSMCycleTable>>cellShape
DSMCycleTable>>cellShapeFor:borderColor:view:at:
DSMCycleTable>>dsm
DSMCycleTable>>dsm:
DSMCycleTable>>edgeCellShapeBorder:fill:
DSMCycleTable>>edgeCellShapeColor:
DSMCycleTable>>renderOn:
DSMCyclesCoverage
DSMCyclesCoverage>>nodeClass
DSMCyclesCoverage>>run
DSMCyclesCoverage>>sort
DSMTarjanNode
DSMTarjanNode>>initialize
DSMTarjanNode>>previousNodes
DSMTarjanNode>>previousNodesInCycles
DSMTarjanNode>>to:
FAMIXGraphNode
FAMIXGraphNode>>from:
FAMIXGraphNode>>initialize
FAMIXGraphNode>>isLeaf
FAMIXGraphNode>>isRoot
FAMIXGraphNode>>nextNodes
FAMIXGraphNode>>nextNodes:
FAMIXGraphNode>>previousNodes
FAMIXGraphNode>>previousNodes:
-=-=-=-=-=-=-=-=-=-=-=-=
I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose')
]; a bit everywhere.
What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked
into Moose-DistributionMap but apparently they are defined somewhere else.
We are almost done.
Cheers,
Alexandre
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
3 Dec
3 Dec
11:07 p.m.
It is Moose-Dsm from http://www.squeaksource.com/dsm.
Doru
On 3 Dec 2010, at 20:01, Alexandre Bergel wrote:
Hi!
I am still struggling to make Moose work on a Pharo 1.1.1. When you execute:
((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load
You end up with an error:
-=-=-=-=-=-=-=-=-=-=-=-=
Warning: This package depends on the following classes:
MalTarjanNode
MalGraphNode
MOCycleTable
MalCyclesCoverage
You must resolve these dependencies before you will be able to load these definitions:
DSMCycleTable
DSMCycleTable>>cellShape
DSMCycleTable>>cellShapeFor:borderColor:view:at:
DSMCycleTable>>dsm
DSMCycleTable>>dsm:
DSMCycleTable>>edgeCellShapeBorder:fill:
DSMCycleTable>>edgeCellShapeColor:
DSMCycleTable>>renderOn:
DSMCyclesCoverage
DSMCyclesCoverage>>nodeClass
DSMCyclesCoverage>>run
DSMCyclesCoverage>>sort
DSMTarjanNode
DSMTarjanNode>>initialize
DSMTarjanNode>>previousNodes
DSMTarjanNode>>previousNodesInCycles
DSMTarjanNode>>to:
FAMIXGraphNode
FAMIXGraphNode>>from:
FAMIXGraphNode>>initialize
FAMIXGraphNode>>isLeaf
FAMIXGraphNode>>isRoot
FAMIXGraphNode>>nextNodes
FAMIXGraphNode>>nextNodes:
FAMIXGraphNode>>previousNodes
FAMIXGraphNode>>previousNodes:
-=-=-=-=-=-=-=-=-=-=-=-=
I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose')
]; a bit everywhere.
What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked
into Moose-DistributionMap but apparently they are defined somewhere else.
We are almost done.
Cheers,
Alexandre
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every now and then stop and ask yourself if the war you're fighting is the right
one."
11:41 p.m.
It still does not work. I've got a similar error than the one described below.
The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires
ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos).
But I have
ConfigurationOfDSM>>baseline21: spec
<version: '2.1-baseline'>
...
spec
package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
...
spec
project: 'MooseAlgos for DSM' with: [
spec
className: 'ConfigurationOfMooseAlgos';
file: 'ConfigurationOfMooseAlgos';
version: 'default';
repository: 'http://www.squeaksource.com/MooseAlgos' ].
...
It still does not work, and I have no clue why...
Cheers,
Alexandre
On 3 Dec 2010, at 19:07, Tudor Girba wrote:
It is Moose-Dsm from http://www.squeaksource.com/dsm.
Doru
On 3 Dec 2010, at 20:01, Alexandre Bergel wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Hi!
I am still struggling to make Moose work on a Pharo 1.1.1. When you execute:
((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load
You end up with an error:
-=-=-=-=-=-=-=-=-=-=-=-=
Warning: This package depends on the following classes:
MalTarjanNode
MalGraphNode
MOCycleTable
MalCyclesCoverage
You must resolve these dependencies before you will be able to load these definitions:
DSMCycleTable
DSMCycleTable>>cellShape
DSMCycleTable>>cellShapeFor:borderColor:view:at:
DSMCycleTable>>dsm
DSMCycleTable>>dsm:
DSMCycleTable>>edgeCellShapeBorder:fill:
DSMCycleTable>>edgeCellShapeColor:
DSMCycleTable>>renderOn:
DSMCyclesCoverage
DSMCyclesCoverage>>nodeClass
DSMCyclesCoverage>>run
DSMCyclesCoverage>>sort
DSMTarjanNode
DSMTarjanNode>>initialize
DSMTarjanNode>>previousNodes
DSMTarjanNode>>previousNodesInCycles
DSMTarjanNode>>to:
FAMIXGraphNode
FAMIXGraphNode>>from:
FAMIXGraphNode>>initialize
FAMIXGraphNode>>isLeaf
FAMIXGraphNode>>isRoot
FAMIXGraphNode>>nextNodes
FAMIXGraphNode>>nextNodes:
FAMIXGraphNode>>previousNodes
FAMIXGraphNode>>previousNodes:
-=-=-=-=-=-=-=-=-=-=-=-=
I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose')
]; a bit everywhere.
What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked
into Moose-DistributionMap but apparently they are defined somewhere else.
We are almost done.
Cheers,
Alexandre
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every now and then stop and ask yourself if the war you're fighting is the
right one."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev 
4 Dec
4 Dec
12:59 a.m.
New subject: Dependencies with MalTarjanNode, MalGraphNode and friends
Alexandre,
Is this happening when you try to load Moose 4.2 from the latest
configuration version in the Moose repository ... let me know the
starting point and I'll take a look at it ...
Dale
On 12/03/2010 02:41 PM, Alexandre Bergel wrote:
It still does not work. I've got a similar error
than the one described below.
The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires
ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos).
But I have
ConfigurationOfDSM>>baseline21: spec
<version: '2.1-baseline'>
...
spec
package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
...
spec
project: 'MooseAlgos for DSM' with: [
spec
className: 'ConfigurationOfMooseAlgos';
file: 'ConfigurationOfMooseAlgos';
version: 'default';
repository: 'http://www.squeaksource.com/MooseAlgos' ].
...
It still does not work, and I have no clue why...
Cheers,
Alexandre
On 3 Dec 2010, at 19:07, Tudor Girba wrote:
It is Moose-Dsm from
http://www.squeaksource.com/dsm.
Doru
On 3 Dec 2010, at 20:01, Alexandre Bergel wrote:
Hi!
I am still struggling to make Moose work on a Pharo 1.1.1. When you execute:
((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load
You end up with an error:
-=-=-=-=-=-=-=-=-=-=-=-=
Warning: This package depends on the following classes:
MalTarjanNode
MalGraphNode
MOCycleTable
MalCyclesCoverage
You must resolve these dependencies before you will be able to load these definitions:
DSMCycleTable
DSMCycleTable>>cellShape
DSMCycleTable>>cellShapeFor:borderColor:view:at:
DSMCycleTable>>dsm
DSMCycleTable>>dsm:
DSMCycleTable>>edgeCellShapeBorder:fill:
DSMCycleTable>>edgeCellShapeColor:
DSMCycleTable>>renderOn:
DSMCyclesCoverage
DSMCyclesCoverage>>nodeClass
DSMCyclesCoverage>>run
DSMCyclesCoverage>>sort
DSMTarjanNode
DSMTarjanNode>>initialize
DSMTarjanNode>>previousNodes
DSMTarjanNode>>previousNodesInCycles
DSMTarjanNode>>to:
FAMIXGraphNode
FAMIXGraphNode>>from:
FAMIXGraphNode>>initialize
FAMIXGraphNode>>isLeaf
FAMIXGraphNode>>isRoot
FAMIXGraphNode>>nextNodes
FAMIXGraphNode>>nextNodes:
FAMIXGraphNode>>previousNodes
FAMIXGraphNode>>previousNodes:
-=-=-=-=-=-=-=-=-=-=-=-=
I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose')
]; a bit everywhere.
What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked
into Moose-DistributionMap but apparently they are defined somewhere else.
We are almost done.
Cheers,
Alexandre
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every now and then stop and ask yourself if the war you're fighting is the
right one."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
6 Dec
6 Dec
3:40 p.m.
Hi Dale,
Apparently Doru fixed the problem we have had for a couple of weeks already.
I missed some packages apparently...
Cheers,
Alexandre
On 3 Dec 2010, at 20:59, Dale Henrichs wrote:
Alexandre,
Is this happening when you try to load Moose 4.2 from the latest configuration version in
the Moose repository ... let me know the starting point and I'll take a look at it
...
Dale
On 12/03/2010 02:41 PM, Alexandre Bergel wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
It still does not work. I've got a similar
error than the one described below.
The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires
ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos).
But I have
ConfigurationOfDSM>>baseline21: spec
<version: '2.1-baseline'>
...
spec
package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
...
spec
project: 'MooseAlgos for DSM' with: [
spec
className: 'ConfigurationOfMooseAlgos';
file: 'ConfigurationOfMooseAlgos';
version: 'default';
repository: 'http://www.squeaksource.com/MooseAlgos' ].
...
It still does not work, and I have no clue why...
Cheers,
Alexandre
On 3 Dec 2010, at 19:07, Tudor Girba wrote:
It is Moose-Dsm from
http://www.squeaksource.com/dsm.
Doru
On 3 Dec 2010, at 20:01, Alexandre Bergel wrote:
Hi!
I am still struggling to make Moose work on a Pharo 1.1.1. When you execute:
((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load
You end up with an error:
-=-=-=-=-=-=-=-=-=-=-=-=
Warning: This package depends on the following classes:
MalTarjanNode
MalGraphNode
MOCycleTable
MalCyclesCoverage
You must resolve these dependencies before you will be able to load these definitions:
DSMCycleTable
DSMCycleTable>>cellShape
DSMCycleTable>>cellShapeFor:borderColor:view:at:
DSMCycleTable>>dsm
DSMCycleTable>>dsm:
DSMCycleTable>>edgeCellShapeBorder:fill:
DSMCycleTable>>edgeCellShapeColor:
DSMCycleTable>>renderOn:
DSMCyclesCoverage
DSMCyclesCoverage>>nodeClass
DSMCyclesCoverage>>run
DSMCyclesCoverage>>sort
DSMTarjanNode
DSMTarjanNode>>initialize
DSMTarjanNode>>previousNodes
DSMTarjanNode>>previousNodesInCycles
DSMTarjanNode>>to:
FAMIXGraphNode
FAMIXGraphNode>>from:
FAMIXGraphNode>>initialize
FAMIXGraphNode>>isLeaf
FAMIXGraphNode>>isRoot
FAMIXGraphNode>>nextNodes
FAMIXGraphNode>>nextNodes:
FAMIXGraphNode>>previousNodes
FAMIXGraphNode>>previousNodes:
-=-=-=-=-=-=-=-=-=-=-=-=
I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for Moose')
]; a bit everywhere.
What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I looked
into Moose-DistributionMap but apparently they are defined somewhere else.
We are almost done.
Cheers,
Alexandre
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every now and then stop and ask yourself if the war you're fighting is the
right one."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
7 Dec
7 Dec
7:48 a.m.
New subject: Dependencies with MalTarjanNode, MalGraphNode and friends
Hi Alexandre,
I was able to track down the source of the issues.. To start with the dependency warning
message from the Monticello multi package loader isn't very helpful, since you have no
clue as to the mcz file that contains the bogus definitions.
By putting a self halt in MCpackageLoader>>analyze I was able to figure out that the
requirements for the missing classes were coming from a variety of sources, apparently
sprinkled throughout the Moose code base:
#(
#RBVariableNode #('extension method for RBVariableNode class')
#RBBlockLintRule #('FameNameConventionBetweenFM3AndSmalltalkRule,
FameOppositeAttributeShouldPointBackRule, FAMIXMetaModelClassesNotDeclaredInFameRule,
FAMIXMetaModelClassesShouldNotOverrideRule, FAMIXMetaModelClassesShouldOverrideRule,
FameSuperclassMetaDescribedExistRule all attempting to subclass RBBlockLintFule')
#MalGraphNode #('FAMIXGraphNode attempt to subclass MalGraphNode')
#RBProgramNodeVisitor #('SmalltalkMethodVisitor, VisualWorksParseTreeVisitor
subclassing RBProgramNodeVisitor')
#RBProgramNode #('extension method for RBProgramNode')
)
Since I knew that the RB classes were coming from the RefactoringBrowser, I took a look at
the loadDirective for the two load expressions (using fetch instead of load, you can look
at the load order packages without actually doing any loads):
(ConfigurationOfMoose project version: '4.2') fetch loadDirective.
(ConfigurationOfMoose project version: '4.2-baseline') fetch loadDirective.
I scanned the two load directive trees looking for a RefactoringBrowser load in the
'4.2-baseline' fetch ... I traced the RefactoringBrowser refs to version
1.0-baseline PetitParser which loaded Glamour2.0-beta.8 which loaded Grease1.3 which ends
up loading the RefactoringBrowser classes.
Tracing the '4.2' fetch down to the PetitParser config, I found that version 1.0
of the PetitParser was being loaded which loaded of Glamour2.0.6 (instead of
Glamour2.0-beta.8) and Glamour2.0.6 does not reference Grease at all... Presumably if you
change the spec for Glamour in ConfigurationOfPetitParser version 1.0 from:
spec project: 'Glamour for Petit' with: '2.0.6'.
to
spec project: 'Glamour for Petit' with: '2.0-beta.8'.
You'll get the RefactoringBrowser classes loaded, however....
I think it would be prudent, to put explicit dependencies upon the RefactoringBrowser
config closer to requirements (whichever package the FAMIX and Fame classes reside
in....that looks like the ConfigurationOfMoose) rather than depend upon the resolution of
the required classes via the Glamour config (which is loading Grease i support of
Magritte)... If you do that, then you won't need to monkey with
ConfigurationOfPetitParser...
So the correct resolution is to make the packages with the offending classes and extension
methods (noted above) be made dependent upon ConfigurationOfRefactoringBrowser directly
from the ConfigurationOfMoose.
Dale
On Dec 6, 2010, at 6:40 AM, Alexandre Bergel wrote:
Hi Dale,
Apparently Doru fixed the problem we have had for a couple of weeks already.
I missed some packages apparently...
Cheers,
Alexandre
On 3 Dec 2010, at 20:59, Dale Henrichs wrote:
Alexandre,
Is this happening when you try to load Moose 4.2 from the latest configuration version in
the Moose repository ... let me know the starting point and I'll take a look at it
...
Dale
On 12/03/2010 02:41 PM, Alexandre Bergel wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
It still does not work. I've got a similar
error than the one described below.
The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires
ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos).
But I have
ConfigurationOfDSM>>baseline21: spec
<version: '2.1-baseline'>
...
spec
package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
...
spec
project: 'MooseAlgos for DSM' with: [
spec
className: 'ConfigurationOfMooseAlgos';
file: 'ConfigurationOfMooseAlgos';
version: 'default';
repository: 'http://www.squeaksource.com/MooseAlgos' ].
...
It still does not work, and I have no clue why...
Cheers,
Alexandre
On 3 Dec 2010, at 19:07, Tudor Girba wrote:
It is Moose-Dsm from
http://www.squeaksource.com/dsm.
Doru
On 3 Dec 2010, at 20:01, Alexandre Bergel wrote:
> Hi!
>
> I am still struggling to make Moose work on a Pharo 1.1.1. When you execute:
> ((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load
>
> You end up with an error:
> -=-=-=-=-=-=-=-=-=-=-=-=
> Warning: This package depends on the following classes:
> MalTarjanNode
> MalGraphNode
> MOCycleTable
> MalCyclesCoverage
> You must resolve these dependencies before you will be able to load these
definitions:
> DSMCycleTable
> DSMCycleTable>>cellShape
> DSMCycleTable>>cellShapeFor:borderColor:view:at:
> DSMCycleTable>>dsm
> DSMCycleTable>>dsm:
> DSMCycleTable>>edgeCellShapeBorder:fill:
> DSMCycleTable>>edgeCellShapeColor:
> DSMCycleTable>>renderOn:
> DSMCyclesCoverage
> DSMCyclesCoverage>>nodeClass
> DSMCyclesCoverage>>run
> DSMCyclesCoverage>>sort
> DSMTarjanNode
> DSMTarjanNode>>initialize
> DSMTarjanNode>>previousNodes
> DSMTarjanNode>>previousNodesInCycles
> DSMTarjanNode>>to:
> FAMIXGraphNode
> FAMIXGraphNode>>from:
> FAMIXGraphNode>>initialize
> FAMIXGraphNode>>isLeaf
> FAMIXGraphNode>>isRoot
> FAMIXGraphNode>>nextNodes
> FAMIXGraphNode>>nextNodes:
> FAMIXGraphNode>>previousNodes
> FAMIXGraphNode>>previousNodes:
> -=-=-=-=-=-=-=-=-=-=-=-=
>
> I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for
Moose') ]; a bit everywhere.
> What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I
looked into Moose-DistributionMap but apparently they are defined somewhere else.
> We are almost done.
>
> Cheers,
> Alexandre
> --
> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> Alexandre Bergel http://www.bergel.eu
> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>
>
>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every now and then stop and ask yourself if the war you're fighting is the
right one."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
22 Dec
22 Dec
10:44 p.m.
Tracing the '4.2' fetch down to the
PetitParser config, I found that version 1.0 of the PetitParser was being loaded which
loaded of Glamour2.0.6 (instead of Glamour2.0-beta.8) and Glamour2.0.6 does not reference
Grease at all... Presumably if you change the spec for Glamour in
ConfigurationOfPetitParser version 1.0 from:
spec project: 'Glamour for Petit' with: '2.0.6'.
to
spec project: 'Glamour for Petit' with: '2.0-beta.8'.
I fixed this, but I still have the missing dependency.
You'll get the RefactoringBrowser classes loaded,
however....
I think it would be prudent, to put explicit dependencies upon the RefactoringBrowser
config closer to requirements (whichever package the FAMIX and Fame classes reside
in....that looks like the ConfigurationOfMoose) rather than depend upon the resolution of
the required classes via the Glamour config (which is loading Grease i support of
Magritte)... If you do that, then you won't need to monkey with
ConfigurationOfPetitParser...
So the correct resolution is to make the packages with the offending classes and
extension methods (noted above) be made dependent upon ConfigurationOfRefactoringBrowser
directly from the ConfigurationOfMoose.
Maybe. But the problem I get seems to be related to "MalGraphNode" that is
loaded after "FAMIXGraphNode".
The 4.2-baseline loads fine, but the version 4.2 that I generated using toolbox has the
dependency problem.
Alexandre
On Dec 6, 2010, at 6:40 AM, Alexandre Bergel wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Hi Dale,
Apparently Doru fixed the problem we have had for a couple of weeks already.
I missed some packages apparently...
Cheers,
Alexandre
On 3 Dec 2010, at 20:59, Dale Henrichs wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Alexandre,
Is this happening when you try to load Moose 4.2 from the latest configuration version in
the Moose repository ... let me know the starting point and I'll take a look at it
...
Dale
On 12/03/2010 02:41 PM, Alexandre Bergel wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
It still does not work. I've got a similar
error than the one described below.
The Moose-dsm package (present in http://www.squeaksource.com/dsm) requires
ConfigurationOfMooseAlgos (from http://www.squeaksource.com/MooseAlgos).
But I have
ConfigurationOfDSM>>baseline21: spec
<version: '2.1-baseline'>
...
spec
package: 'Moose-Dsm' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
package: 'Moose-CycleTable' with: [spec requires: #('Mondrian for DSM'
'MooseAlgos for DSM')];
...
spec
project: 'MooseAlgos for DSM' with: [
spec
className: 'ConfigurationOfMooseAlgos';
file: 'ConfigurationOfMooseAlgos';
version: 'default';
repository: 'http://www.squeaksource.com/MooseAlgos' ].
...
It still does not work, and I have no clue why...
Cheers,
Alexandre
On 3 Dec 2010, at 19:07, Tudor Girba wrote:
> It is Moose-Dsm from http://www.squeaksource.com/dsm.
>
> Doru
>
>
> On 3 Dec 2010, at 20:01, Alexandre Bergel wrote:
>
>> Hi!
>>
>> I am still struggling to make Moose work on a Pharo 1.1.1. When you execute:
>> ((Smalltalk at: #ConfigurationOfMoose) project version: '4.2') load
>>
>> You end up with an error:
>> -=-=-=-=-=-=-=-=-=-=-=-=
>> Warning: This package depends on the following classes:
>> MalTarjanNode
>> MalGraphNode
>> MOCycleTable
>> MalCyclesCoverage
>> You must resolve these dependencies before you will be able to load these
definitions:
>> DSMCycleTable
>> DSMCycleTable>>cellShape
>> DSMCycleTable>>cellShapeFor:borderColor:view:at:
>> DSMCycleTable>>dsm
>> DSMCycleTable>>dsm:
>> DSMCycleTable>>edgeCellShapeBorder:fill:
>> DSMCycleTable>>edgeCellShapeColor:
>> DSMCycleTable>>renderOn:
>> DSMCyclesCoverage
>> DSMCyclesCoverage>>nodeClass
>> DSMCyclesCoverage>>run
>> DSMCyclesCoverage>>sort
>> DSMTarjanNode
>> DSMTarjanNode>>initialize
>> DSMTarjanNode>>previousNodes
>> DSMTarjanNode>>previousNodesInCycles
>> DSMTarjanNode>>to:
>> FAMIXGraphNode
>> FAMIXGraphNode>>from:
>> FAMIXGraphNode>>initialize
>> FAMIXGraphNode>>isLeaf
>> FAMIXGraphNode>>isRoot
>> FAMIXGraphNode>>nextNodes
>> FAMIXGraphNode>>nextNodes:
>> FAMIXGraphNode>>previousNodes
>> FAMIXGraphNode>>previousNodes:
>> -=-=-=-=-=-=-=-=-=-=-=-=
>>
>> I put some spec requires: #('Mondrian for Moose' 'MooseAlgos for
Moose') ]; a bit everywhere.
>> What package defines the class DSMTarjanNode, DSMCyclesCoverage, DSMCycleTable? I
looked into Moose-DistributionMap but apparently they are defined somewhere else.
>> We are almost done.
>>
>> Cheers,
>> Alexandre
>> --
>> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
>> Alexandre Bergel http://www.bergel.eu
>> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
> --
> www.tudorgirba.com
>
> "Every now and then stop and ask yourself if the war you're fighting is the
right one."
>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
4885
days inactive
4904
days old
6 comments
5 participants
participants (5)
-
Alexandre Bergel -
Alexandre Bergel -
Alexandre Bergel -
Dale Henrichs -
Tudor Girba