8 Aug
2011
8 Aug
'11
11:11 p.m.
Hi guys
I will start a new development phase for RPackage and I would love to know if the version
3.3 when loaded in Moose is working.
I would like to know if we can use this one as stable so that I can work on 3.4 (as dev
branch)
tx
Stef
18 Aug
18 Aug
10:23 p.m.
Hi guys
could you please check that when Moose uses version 3.3 everything is ok because I want to
change the configuration so that I can continue to work on RPackage.
If by monday I got no news I will push 3.3 to stable and we will see.
Stef
On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
Hi guys
I will start a new development phase for RPackage and I would love to know if the version
3.3 when loaded in Moose is working.
I would like to know if we can use this one as stable so that I can work on 3.4 (as dev
branch)
tx
Stef
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
11:29 p.m.
Hi,
Sorry, I was busy with other things. I will try to look at it tomorrow.
Doru
On 18 Aug 2011, at 22:23, Stéphane Ducasse wrote:
Hi guys
could you please check that when Moose uses version 3.3 everything is ok because I want
to change the configuration so that I can continue to work on RPackage.
If by monday I got no news I will push 3.3 to stable and we will see.
Stef
On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
--
www.tudorgirba.com
"To utilize feedback, you first have to acquire it."
Hi guys
I will start a new development phase for RPackage and I would love to know if the version
3.3 when loaded in Moose is working.
I would like to know if we can use this one as stable so that I can work on 3.4 (as dev
branch)
tx
Stef
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev 
11:34 p.m.
I have been using RPackage 3.4 and did not experience any problem
Alexandre
On 18 Aug 2011, at 22:23, Stéphane Ducasse wrote:
Hi guys
could you please check that when Moose uses version 3.3 everything is ok because I want
to change the configuration so that I can continue to work on RPackage.
If by monday I got no news I will push 3.3 to stable and we will see.
Stef
On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Hi guys
I will start a new development phase for RPackage and I would love to know if the version
3.3 when loaded in Moose is working.
I would like to know if we can use this one as stable so that I can work on 3.4 (as dev
branch)
tx
Stef
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
11:44 p.m.
Great. Could you run the Moose tests to check?
Cheers,
Doru
On 18 Aug 2011, at 23:34, Alexandre Bergel wrote:
I have been using RPackage 3.4 and did not experience
any problem
Alexandre
On 18 Aug 2011, at 22:23, Stéphane Ducasse wrote:
--
www.tudorgirba.com
"Every thing should have the right to be different."
Hi guys
could you please check that when Moose uses version 3.3 everything is ok because I want
to change the configuration so that I can continue to work on RPackage.
If by monday I got no news I will push 3.3 to stable and we will see.
Stef
On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi guys
I will start a new development phase for RPackage and I would love to know if the version
3.3 when loaded in Moose is working.
I would like to know if we can use this one as stable so that I can work on 3.4 (as dev
branch)
tx
Stef
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
11:55 p.m.
I run the test of famix, glamour, kumpel, magritte, Moose, RPackage, and I got:
3752 run, 3742 passes, 10 expected failures, 0 failures, 0 errors, 0 unexpected passes
So we've got the green light!
Alexandre
On 18 Aug 2011, at 23:44, Tudor Girba wrote:
Great. Could you run the Moose tests to check?
Cheers,
Doru
On 18 Aug 2011, at 23:34, Alexandre Bergel wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
I have been using RPackage 3.4 and did not
experience any problem
Alexandre
On 18 Aug 2011, at 22:23, Stéphane Ducasse wrote:
--
www.tudorgirba.com
"Every thing should have the right to be different."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi guys
could you please check that when Moose uses version 3.3 everything is ok because I want
to change the configuration so that I can continue to work on RPackage.
If by monday I got no news I will push 3.3 to stable and we will see.
Stef
On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi guys
I will start a new development phase for RPackage and I would love to know if the version
3.3 when loaded in Moose is working.
I would like to know if we can use this one as stable so that I can work on 3.4 (as dev
branch)
tx
Stef
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
19 Aug
19 Aug
8:54 a.m.
excellent thanks.
On Aug 18, 2011, at 11:55 PM, Alexandre Bergel wrote:
I run the test of famix, glamour, kumpel, magritte,
Moose, RPackage, and I got:
3752 run, 3742 passes, 10 expected failures, 0 failures, 0 errors, 0 unexpected passes
So we've got the green light!
Alexandre
On 18 Aug 2011, at 23:44, Tudor Girba wrote:
Great. Could you run the Moose tests to check?
Cheers,
Doru
On 18 Aug 2011, at 23:34, Alexandre Bergel wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev I have been using RPackage 3.4 and did not
experience any problem
Alexandre
On 18 Aug 2011, at 22:23, Stéphane Ducasse wrote:
--
www.tudorgirba.com
"Every thing should have the right to be different."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi guys
could you please check that when Moose uses version 3.3 everything is ok because I want
to change the configuration so that I can continue to work on RPackage.
If by monday I got no news I will push 3.3 to stable and we will see.
Stef
On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
> Hi guys
>
> I will start a new development phase for RPackage and I would love to know if the
version 3.3 when loaded in Moose is working.
> I would like to know if we can use this one as stable so that I can work on 3.4 (as
dev branch)
>
> tx
>
> Stef
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
8:54 a.m.
Ok I created 3.5 as dev then and I will marke 3.4 as stable.
Stef
On Aug 18, 2011, at 11:55 PM, Alexandre Bergel wrote:
I run the test of famix, glamour, kumpel, magritte,
Moose, RPackage, and I got:
3752 run, 3742 passes, 10 expected failures, 0 failures, 0 errors, 0 unexpected passes
So we've got the green light!
Alexandre
On 18 Aug 2011, at 23:44, Tudor Girba wrote:
Great. Could you run the Moose tests to check?
Cheers,
Doru
On 18 Aug 2011, at 23:34, Alexandre Bergel wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev I have been using RPackage 3.4 and did not
experience any problem
Alexandre
On 18 Aug 2011, at 22:23, Stéphane Ducasse wrote:
--
www.tudorgirba.com
"Every thing should have the right to be different."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi guys
could you please check that when Moose uses version 3.3 everything is ok because I want
to change the configuration so that I can continue to work on RPackage.
If by monday I got no news I will push 3.3 to stable and we will see.
Stef
On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
> Hi guys
>
> I will start a new development phase for RPackage and I would love to know if the
version 3.3 when loaded in Moose is working.
> I would like to know if we can use this one as stable so that I can work on 3.4 (as
dev branch)
>
> tx
>
> Stef
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev 
7:22 p.m.
Hi Stef, if you can please take a look at the following issue:
Issue 4441: RPackage should be intialized when RPackageOrganizer
default is changed
Now, if you evaluate "RPackage organizer class resetDefault", the
RPackage default refers to the old one.
I fixed it in the issue.
Fernando
On Fri, Aug 19, 2011 at 8:54 AM, Stéphane Ducasse
<stephane.ducasse(a)inria.fr> wrote:
Ok I created 3.5 as dev then and I will marke 3.4 as
stable.
Stef
On Aug 18, 2011, at 11:55 PM, Alexandre Bergel wrote:
I run the test of famix, glamour, kumpel,
magritte, Moose, RPackage, and I got:
3752 run, 3742 passes, 10 expected failures, 0 failures, 0 errors, 0 unexpected passes
So we've got the green light!
Alexandre
On 18 Aug 2011, at 23:44, Tudor Girba wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Great. Could you run the Moose tests to check?
Cheers,
Doru
On 18 Aug 2011, at 23:34, Alexandre Bergel wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev I have been using RPackage 3.4 and did not
experience any problem
Alexandre
On 18 Aug 2011, at 22:23, Stéphane Ducasse wrote:
> Hi guys
>
> could you please check that when Moose uses version 3.3 everything is ok because I
want to change the configuration so that I can continue to work on RPackage.
> If by monday I got no news I will push 3.3 to stable and we will see.
>
> Stef
>
> On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
>
>> Hi guys
>>
>> I will start a new development phase for RPackage and I would love to know if the
version 3.3 when loaded in Moose is working.
>> I would like to know if we can use this one as stable so that I can work on 3.4
(as dev branch)
>>
>> tx
>>
>> Stef
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every thing should have the right to be different."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
10:49 p.m.
Thanks I will have a look
Stef
On Aug 19, 2011, at 6:22 PM, Fernando Olivero wrote:
Hi Stef, if you can please take a look at the
following issue:
Issue 4441: RPackage should be intialized when RPackageOrganizer
default is changed
Now, if you evaluate "RPackage organizer class resetDefault", the
RPackage default refers to the old one.
I fixed it in the issue.
Fernando
On Fri, Aug 19, 2011 at 8:54 AM, Stéphane Ducasse
<stephane.ducasse(a)inria.fr> wrote:
Ok I created 3.5 as dev then and I will marke 3.4
as stable.
Stef
On Aug 18, 2011, at 11:55 PM, Alexandre Bergel wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev I run the test of famix, glamour, kumpel,
magritte, Moose, RPackage, and I got:
3752 run, 3742 passes, 10 expected failures, 0 failures, 0 errors, 0 unexpected passes
So we've got the green light!
Alexandre
On 18 Aug 2011, at 23:44, Tudor Girba wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Great. Could you run the Moose tests to check?
Cheers,
Doru
On 18 Aug 2011, at 23:34, Alexandre Bergel wrote:
> I have been using RPackage 3.4 and did not experience any problem
>
> Alexandre
>
> On 18 Aug 2011, at 22:23, Stéphane Ducasse wrote:
>
>> Hi guys
>>
>> could you please check that when Moose uses version 3.3 everything is ok because
I want to change the configuration so that I can continue to work on RPackage.
>> If by monday I got no news I will push 3.3 to stable and we will see.
>>
>> Stef
>>
>> On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
>>
>>> Hi guys
>>>
>>> I will start a new development phase for RPackage and I would love to know if
the version 3.3 when loaded in Moose is working.
>>> I would like to know if we can use this one as stable so that I can work on
3.4 (as dev branch)
>>>
>>> tx
>>>
>>> Stef
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
> --
> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> Alexandre Bergel http://www.bergel.eu
> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>
>
>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every thing should have the right to be different."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
11:34 p.m.
Ok I integrated your fix.
I will restart to work on RPackage.
Stef
On Aug 19, 2011, at 6:22 PM, Fernando Olivero wrote:
Hi Stef, if you can please take a look at the
following issue:
Issue 4441: RPackage should be intialized when RPackageOrganizer
default is changed
Now, if you evaluate "RPackage organizer class resetDefault", the
RPackage default refers to the old one.
I fixed it in the issue.
Fernando
On Fri, Aug 19, 2011 at 8:54 AM, Stéphane Ducasse
<stephane.ducasse(a)inria.fr> wrote:
Ok I created 3.5 as dev then and I will marke 3.4
as stable.
Stef
On Aug 18, 2011, at 11:55 PM, Alexandre Bergel wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev I run the test of famix, glamour, kumpel,
magritte, Moose, RPackage, and I got:
3752 run, 3742 passes, 10 expected failures, 0 failures, 0 errors, 0 unexpected passes
So we've got the green light!
Alexandre
On 18 Aug 2011, at 23:44, Tudor Girba wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Great. Could you run the Moose tests to check?
Cheers,
Doru
On 18 Aug 2011, at 23:34, Alexandre Bergel wrote:
> I have been using RPackage 3.4 and did not experience any problem
>
> Alexandre
>
> On 18 Aug 2011, at 22:23, Stéphane Ducasse wrote:
>
>> Hi guys
>>
>> could you please check that when Moose uses version 3.3 everything is ok because
I want to change the configuration so that I can continue to work on RPackage.
>> If by monday I got no news I will push 3.3 to stable and we will see.
>>
>> Stef
>>
>> On Aug 8, 2011, at 11:11 PM, Stéphane Ducasse wrote:
>>
>>> Hi guys
>>>
>>> I will start a new development phase for RPackage and I would love to know if
the version 3.3 when loaded in Moose is working.
>>> I would like to know if we can use this one as stable so that I can work on
3.4 (as dev branch)
>>>
>>> tx
>>>
>>> Stef
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
> --
> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
> Alexandre Bergel http://www.bergel.eu
> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
>
>
>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every thing should have the right to be different."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
4888
days inactive
4899
days old
10 comments
4 participants
participants (4)
-
Alexandre Bergel -
Fernando Olivero -
Stéphane Ducasse -
Tudor Girba