Hi,
I'm wondering if it's possible to configure the MSE importer of Moose to import elements that satisfy some conditions (e.g., [ :element | element isFamixPackage ]). In fact, I need to import only packages/namespaces and their classes from MSE files. Why? because I want to load many many moose models (software versions) in one image and I'm interested in few information within those models (e.g., packages and their classes --without methods, attributes, references, invocations, etc.).
By reading FMMSEParser and FMParseClientFilter, I found that we may set a filter that specify the name of elements to import. Yet I'm not sure about this. However, I did not find any api that we may use to set a filter that specify the type of elements to import. Is there a such api? if no, is it "possible" to implement it? any suggestions?
It would be great if we can set a block filter: e.g., [ :element | element isFamixScopingEntity and: [ element isStub not ] ]
Cheers, Hani
Hello Hani,
Yes, it is possible. You can use the MooseImportingContext and set the entities that you want to import.
See for example FAMIXStepwiseImporterTest>>testImportNamespace
regards,
On Fri, Feb 15, 2013 at 12:25 AM, Hani Abdeen hani.abdeen@gmail.com wrote:
Hi,
I'm wondering if it's possible to configure the MSE importer of Moose to import elements that satisfy some conditions (e.g., [ :element | element isFamixPackage ]). In fact, I need to import only packages/namespaces and their classes from MSE files. Why? because I want to load many many moose models (software versions) in one image and I'm interested in few information within those models (e.g., packages and their classes --without methods, attributes, references, invocations, etc.).
By reading FMMSEParser and FMParseClientFilter, I found that we may set a filter that specify the name of elements to import. Yet I'm not sure about this. However, I did not find any api that we may use to set a filter that specify the type of elements to import. Is there a such api? if no, is it "possible" to implement it? any suggestions?
It would be great if we can set a block filter: e.g., [ :element | element isFamixScopingEntity and: [ element isStub not ] ]
Cheers, Hani
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Many thanks Andre,
this is excellent
regards, Hani
On 15 February 2013 10:23, Andre Hora andrehoraa@gmail.com wrote:
Hello Hani,
Yes, it is possible. You can use the MooseImportingContext and set the entities that you want to import.
See for example FAMIXStepwiseImporterTest>>testImportNamespace
regards,
On Fri, Feb 15, 2013 at 12:25 AM, Hani Abdeen hani.abdeen@gmail.comwrote:
Hi,
I'm wondering if it's possible to configure the MSE importer of Moose to import elements that satisfy some conditions (e.g., [ :element | element isFamixPackage ]). In fact, I need to import only packages/namespaces and their classes from MSE files. Why? because I want to load many many moose models (software versions) in one image and I'm interested in few information within those models (e.g., packages and their classes --without methods, attributes, references, invocations, etc.).
By reading FMMSEParser and FMParseClientFilter, I found that we may set a filter that specify the name of elements to import. Yet I'm not sure about this. However, I did not find any api that we may use to set a filter that specify the type of elements to import. Is there a such api? if no, is it "possible" to implement it? any suggestions?
It would be great if we can set a block filter: e.g., [ :element | element isFamixScopingEntity and: [ element isStub not ] ]
Cheers, Hani
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-- Andre Hora
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
fun part of all this is that you are both sitting one next to the other in the same room :-) :-) :-)
nicolas
On 02/15/2013 10:52 AM, Hani Abdeen wrote:
Many thanks Andre,
this is excellent
regards, Hani
On 15 February 2013 10:23, Andre Hora <andrehoraa@gmail.com mailto:andrehoraa@gmail.com> wrote:
Hello Hani, Yes, it is possible. You can use the MooseImportingContext and set the entities that you want to import. See for example FAMIXStepwiseImporterTest>>testImportNamespace regards, On Fri, Feb 15, 2013 at 12:25 AM, Hani Abdeen <hani.abdeen@gmail.com <mailto:hani.abdeen@gmail.com>> wrote: Hi, I'm wondering if it's possible to configure the MSE importer of Moose to import elements that satisfy some conditions (e.g., [ :element | element isFamixPackage ]). In fact, I need to import only packages/namespaces and their classes from MSE files. Why? because I want to load many many moose models (software versions) in one image and I'm interested in few information within those models (e.g., packages and their classes --without methods, attributes, references, invocations, etc.). By reading FMMSEParser and FMParseClientFilter, I found that we may set a filter that specify the name of elements to import. Yet I'm not sure about this. However, I did not find any api that we may use to set a filter that specify the type of elements to import. Is there a such api? if no, is it "possible" to implement it? any suggestions? It would be great if we can set a block filter: e.g., [ :element | element isFamixScopingEntity and: [ element isStub not ] ] Cheers, Hani _______________________________________________ Moose-dev mailing list Moose-dev@iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch> https://www.iam.unibe.ch/mailman/listinfo/moose-dev -- Andre Hora _______________________________________________ Moose-dev mailing list Moose-dev@iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
On Fri, Feb 15, 2013 at 4:40 PM, Nicolas Anquetil <Nicolas.Anquetil@inria.fr
wrote:
fun part of all this is that you are both sitting one next to the other in the same room :-) :-) :-)
Not midnight when he asked =D
nicolas
On 02/15/2013 10:52 AM, Hani Abdeen wrote:
Many thanks Andre,
this is excellent
regards, Hani
On 15 February 2013 10:23, Andre Hora andrehoraa@gmail.com wrote:
Hello Hani,
Yes, it is possible. You can use the MooseImportingContext and set the entities that you want to import.
See for example FAMIXStepwiseImporterTest>>testImportNamespace
regards,
On Fri, Feb 15, 2013 at 12:25 AM, Hani Abdeen hani.abdeen@gmail.comwrote:
Hi,
I'm wondering if it's possible to configure the MSE importer of Moose to import elements that satisfy some conditions (e.g., [ :element | element isFamixPackage ]). In fact, I need to import only packages/namespaces and their classes from MSE files. Why? because I want to load many many moose models (software versions) in one image and I'm interested in few information within those models (e.g., packages and their classes --without methods, attributes, references, invocations, etc.).
By reading FMMSEParser and FMParseClientFilter, I found that we may set a filter that specify the name of elements to import. Yet I'm not sure about this. However, I did not find any api that we may use to set a filter that specify the type of elements to import. Is there a such api? if no, is it "possible" to implement it? any suggestions?
It would be great if we can set a block filter: e.g., [ :element | element isFamixScopingEntity and: [ element isStub not ] ]
Cheers, Hani
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-- Andre Hora
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Moose-dev mailing listMoose-dev@iam.unibe.chhttps://www.iam.unibe.ch/mailman/listinfo/moose-dev
-- Nicolas Anquetil -- RMod research team (Inria)
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
fun part of all this is that you are both sitting one next to the other in the same room :-) :-) :-)
:) yes it's fun, we both discussed this subject yesterday and both forgot MooseImportingContext thanks to Moose mailinglist, asking the question via this mailing-list has helped Andre to remember this class :) Indeed, your room is not so far from ours and so on :)
Hani
nicolas
On 02/15/2013 10:52 AM, Hani Abdeen wrote:
Many thanks Andre,
this is excellent
regards, Hani
On 15 February 2013 10:23, Andre Hora andrehoraa@gmail.com wrote:
Hello Hani,
Yes, it is possible. You can use the MooseImportingContext and set the entities that you want to import.
See for example FAMIXStepwiseImporterTest>>testImportNamespace
regards,
On Fri, Feb 15, 2013 at 12:25 AM, Hani Abdeen hani.abdeen@gmail.comwrote:
Hi,
I'm wondering if it's possible to configure the MSE importer of Moose to import elements that satisfy some conditions (e.g., [ :element | element isFamixPackage ]). In fact, I need to import only packages/namespaces and their classes from MSE files. Why? because I want to load many many moose models (software versions) in one image and I'm interested in few information within those models (e.g., packages and their classes --without methods, attributes, references, invocations, etc.).
By reading FMMSEParser and FMParseClientFilter, I found that we may set a filter that specify the name of elements to import. Yet I'm not sure about this. However, I did not find any api that we may use to set a filter that specify the type of elements to import. Is there a such api? if no, is it "possible" to implement it? any suggestions?
It would be great if we can set a block filter: e.g., [ :element | element isFamixScopingEntity and: [ element isStub not ] ]
Cheers, Hani
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-- Andre Hora
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Moose-dev mailing listMoose-dev@iam.unibe.chhttps://www.iam.unibe.ch/mailman/listinfo/moose-dev
-- Nicolas Anquetil -- RMod research team (Inria)
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-
Andre Hora -
Hani Abdeen -
Nicolas Anquetil