10:34 a.m.
Hello,
I've got an image I develop in and would like to be able to generate
diagrams for a number of classes and relationships to explain how things
are working to other people.
How can I do that with Moose? (Or GT I have loaded in 3.0)
I have seen a couple diagrams floating around, so it is definitely possible
to do.
But I also saw that all of that was done in a Moose image and not in a
normal Pharo image.
TIA
Phil
11:10 a.m.
I haven't seen support for UML class diagrams in a Pharo image yet.
However, it is possible in Moose image.
Open MoosePanel, import your code in Moose (st icon on top right). One
model imported, All Model Classes-> right click -> UML Class diagram.
usman
On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <phil(a)highoctane.be>
wrote:
Hello,
I've got an image I develop in and would like to be able to generate
diagrams for a number of classes and relationships to explain how things
are working to other people.
How can I do that with Moose? (Or GT I have loaded in 3.0)
I have seen a couple diagrams floating around, so it is definitely
possible to do.
But I also saw that all of that was done in a Moose image and not in a
normal Pharo image.
TIA
Phil
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
11:42 a.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not sure
by Pharo 3 compatibility but Roassal2 should work there.)
Peter
On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti <usman.bhatti(a)gmail.com>
wrote:
I haven't seen support for UML class diagrams in a Pharo image
yet.
However, it is possible in Moose image.
Open MoosePanel, import your code in Moose (st icon on top right). One
model imported, All Model Classes-> right click -> UML Class diagram.
usman
On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <phil(a)highoctane.be>
wrote:
> Hello,
>
> I've got an image I develop in and would like to be able to generate
> diagrams for a number of classes and relationships to explain how things
> are working to other people.
>
> How can I do that with Moose? (Or GT I have loaded in 3.0)
>
> I have seen a couple diagrams floating around, so it is definitely
> possible to do.
>
> But I also saw that all of that was done in a Moose image and not in a
> normal Pharo image.
>
> TIA
> Phil
>
>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
12:37 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Thx... Roassal2 is loaded in my image but there is no RTUMLClassBuilder
there.
[image: Inline image 1]
Where can I get that?
Phil
On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not
sure
by Pharo 3 compatibility but Roassal2 should work there.)
Peter
On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti <usman.bhatti(a)gmail.com>
wrote:
> I haven't seen support for UML class diagrams in a Pharo image yet.
>
> However, it is possible in Moose image.
> Open MoosePanel, import your code in Moose (st icon on top right). One
> model imported, All Model Classes-> right click -> UML Class diagram.
>
> usman
>
> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <phil(a)highoctane.be>
> wrote:
>
>> Hello,
>>
>> I've got an image I develop in and would like to be able to generate
>> diagrams for a number of classes and relationships to explain how things
>> are working to other people.
>>
>> How can I do that with Moose? (Or GT I have loaded in 3.0)
>>
>> I have seen a couple diagrams floating around, so it is definitely
>> possible to do.
>>
>> But I also saw that all of that was done in a Moose image and not in a
>> normal Pharo image.
>>
>> TIA
>> Phil
>>
>>
>>
>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
12:55 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Do you have the latest version?
Gofer new smalltalkhubUser: 'ObjectProfile' project: 'Roassal2'; package:
'ConfigurationOfRoassal2'; load. (Smalltalk at: #ConfigurationOfRoassal2)
loadDevelopment
On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <phil(a)highoctane.be>
wrote:
Thx... Roassal2 is loaded in my image but there is no
RTUMLClassBuilder
there.
[image: Inline image 1]
Where can I get that?
Phil
On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
> Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not
> sure by Pharo 3 compatibility but Roassal2 should work there.)
>
> Peter
>
> On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti <usman.bhatti(a)gmail.com>
> wrote:
>
>> I haven't seen support for UML class diagrams in a Pharo image yet.
>>
>> However, it is possible in Moose image.
>> Open MoosePanel, import your code in Moose (st icon on top right). One
>> model imported, All Model Classes-> right click -> UML Class diagram.
>>
>> usman
>>
>> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <phil(a)highoctane.be>
>> wrote:
>>
>>> Hello,
>>>
>>> I've got an image I develop in and would like to be able to generate
>>> diagrams for a number of classes and relationships to explain how things
>>> are working to other people.
>>>
>>> How can I do that with Moose? (Or GT I have loaded in 3.0)
>>>
>>> I have seen a couple diagrams floating around, so it is definitely
>>> possible to do.
>>>
>>> But I also saw that all of that was done in a Moose image and not in a
>>> normal Pharo image.
>>>
>>> TIA
>>> Phil
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>
>>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
1:15 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Indeed. You need a fairly recent version of Roassal2 to get
RTUMLClassBuilder.
For a package, you can simply trigger it like this (inspect):
b := RTUMLClassBuilder new.
b addObjects: (RPackageOrganizer default packageNamed: 'AST-Core')
definedClasses.
b treeLayout.
b build.
b view
Cheers,
Doru
On Thu, Nov 6, 2014 at 12:55 PM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
Do you have the latest version?
Gofer new smalltalkhubUser: 'ObjectProfile' project: 'Roassal2';
package:
'ConfigurationOfRoassal2'; load. (Smalltalk at: #ConfigurationOfRoassal2)
loadDevelopment
On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <phil(a)highoctane.be>
wrote:
> Thx... Roassal2 is loaded in my image but there is no RTUMLClassBuilder
> there.
>
>
> [image: Inline image 1]
>
> Where can I get that?
>
> Phil
>
> On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
>
>> Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not
>> sure by Pharo 3 compatibility but Roassal2 should work there.)
>>
>> Peter
>>
>> On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti <usman.bhatti(a)gmail.com>
>> wrote:
>>
>>> I haven't seen support for UML class diagrams in a Pharo image yet.
>>>
>>> However, it is possible in Moose image.
>>> Open MoosePanel, import your code in Moose (st icon on top right). One
>>> model imported, All Model Classes-> right click -> UML Class diagram.
>>>
>>> usman
>>>
>>> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <phil(a)highoctane.be
>>> > wrote:
>>>
>>>> Hello,
>>>>
>>>> I've got an image I develop in and would like to be able to generate
>>>> diagrams for a number of classes and relationships to explain how things
>>>> are working to other people.
>>>>
>>>> How can I do that with Moose? (Or GT I have loaded in 3.0)
>>>>
>>>> I have seen a couple diagrams floating around, so it is definitely
>>>> possible to do.
>>>>
>>>> But I also saw that all of that was done in a Moose image and not in a
>>>> normal Pharo image.
>>>>
>>>> TIA
>>>> Phil
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Moose-dev mailing list
>>>> Moose-dev(a)iam.unibe.ch
>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>
>>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every thing has its own flow"
2:01 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Loaded as mentioned but:
renderOn: aView
self paintingBlock glamourValue: (
aView asGlamorousMultiValue,
self entity asGlamorousMultiValue,
self asGlamorousMultiValue ).
aView build.
self shouldPopulateSelection ifTrue: [
aView view elements do: [:each |
each on: TRMouseLeftClick do: [:event | self selection: each model ]] ].
self view: aView
RTElement>>on:do: MNU
Phil
On Thu, Nov 6, 2014 at 1:15 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote:
Indeed. You need a fairly recent version of Roassal2 to get
RTUMLClassBuilder.
For a package, you can simply trigger it like this (inspect):
b := RTUMLClassBuilder new.
b addObjects: (RPackageOrganizer default packageNamed: 'AST-Core')
definedClasses.
b treeLayout.
b build.
b view
Cheers,
Doru
On Thu, Nov 6, 2014 at 12:55 PM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
> Do you have the latest version?
>
> Gofer new smalltalkhubUser: 'ObjectProfile' project: 'Roassal2';
package:
> 'ConfigurationOfRoassal2'; load. (Smalltalk at: #ConfigurationOfRoassal2)
> loadDevelopment
>
> On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <phil(a)highoctane.be>
> wrote:
>
>> Thx... Roassal2 is loaded in my image but there is no RTUMLClassBuilder
>> there.
>>
>>
>> [image: Inline image 1]
>>
>> Where can I get that?
>>
>> Phil
>>
>> On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
>>
>>> Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not
>>> sure by Pharo 3 compatibility but Roassal2 should work there.)
>>>
>>> Peter
>>>
>>> On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti <usman.bhatti(a)gmail.com>
>>> wrote:
>>>
>>>> I haven't seen support for UML class diagrams in a Pharo image yet.
>>>>
>>>> However, it is possible in Moose image.
>>>> Open MoosePanel, import your code in Moose (st icon on top right). One
>>>> model imported, All Model Classes-> right click -> UML Class
diagram.
>>>>
>>>> usman
>>>>
>>>> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <
>>>> phil(a)highoctane.be> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> I've got an image I develop in and would like to be able to
generate
>>>>> diagrams for a number of classes and relationships to explain how
things
>>>>> are working to other people.
>>>>>
>>>>> How can I do that with Moose? (Or GT I have loaded in 3.0)
>>>>>
>>>>> I have seen a couple diagrams floating around, so it is definitely
>>>>> possible to do.
>>>>>
>>>>> But I also saw that all of that was done in a Moose image and not in
>>>>> a normal Pharo image.
>>>>>
>>>>> TIA
>>>>> Phil
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Moose-dev mailing list
>>>>> Moose-dev(a)iam.unibe.ch
>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Moose-dev mailing list
>>>> Moose-dev(a)iam.unibe.ch
>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>
>>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
--
www.tudorgirba.com
"Every thing has its own flow"
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
2:09 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
You should load the latest of everything. I guess you need to update
Glamour as well.
Doru
On Thu, Nov 6, 2014 at 2:01 PM, phil(a)highoctane.be <phil(a)highoctane.be>
wrote:
Loaded as mentioned but:
renderOn: aView
self paintingBlock glamourValue: (
aView asGlamorousMultiValue,
self entity asGlamorousMultiValue,
self asGlamorousMultiValue ).
aView build.
self shouldPopulateSelection ifTrue: [
aView view elements do: [:each |
each on: TRMouseLeftClick do: [:event | self selection: each model ]] ].
self view: aView
RTElement>>on:do: MNU
Phil
On Thu, Nov 6, 2014 at 1:15 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote:
> Indeed. You need a fairly recent version of Roassal2 to get
> RTUMLClassBuilder.
>
> For a package, you can simply trigger it like this (inspect):
> b := RTUMLClassBuilder new.
> b addObjects: (RPackageOrganizer default packageNamed: 'AST-Core')
> definedClasses.
> b treeLayout.
> b build.
> b view
>
> Cheers,
> Doru
>
> On Thu, Nov 6, 2014 at 12:55 PM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
>
>> Do you have the latest version?
>>
>> Gofer new smalltalkhubUser: 'ObjectProfile' project: 'Roassal2';
>> package: 'ConfigurationOfRoassal2'; load. (Smalltalk at:
>> #ConfigurationOfRoassal2) loadDevelopment
>>
>> On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <phil(a)highoctane.be>
>> wrote:
>>
>>> Thx... Roassal2 is loaded in my image but there is no RTUMLClassBuilder
>>> there.
>>>
>>>
>>> [image: Inline image 1]
>>>
>>> Where can I get that?
>>>
>>> Phil
>>>
>>> On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com>
wrote:
>>>
>>>> Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not
>>>> sure by Pharo 3 compatibility but Roassal2 should work there.)
>>>>
>>>> Peter
>>>>
>>>> On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti
<usman.bhatti(a)gmail.com>
>>>> wrote:
>>>>
>>>>> I haven't seen support for UML class diagrams in a Pharo image
yet.
>>>>>
>>>>> However, it is possible in Moose image.
>>>>> Open MoosePanel, import your code in Moose (st icon on top right).
>>>>> One model imported, All Model Classes-> right click -> UML
Class diagram.
>>>>>
>>>>> usman
>>>>>
>>>>> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <
>>>>> phil(a)highoctane.be> wrote:
>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> I've got an image I develop in and would like to be able to
generate
>>>>>> diagrams for a number of classes and relationships to explain how
things
>>>>>> are working to other people.
>>>>>>
>>>>>> How can I do that with Moose? (Or GT I have loaded in 3.0)
>>>>>>
>>>>>> I have seen a couple diagrams floating around, so it is
definitely
>>>>>> possible to do.
>>>>>>
>>>>>> But I also saw that all of that was done in a Moose image and not
in
>>>>>> a normal Pharo image.
>>>>>>
>>>>>> TIA
>>>>>> Phil
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Moose-dev mailing list
>>>>>> Moose-dev(a)iam.unibe.ch
>>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Moose-dev mailing list
>>>>> Moose-dev(a)iam.unibe.ch
>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Moose-dev mailing list
>>>> Moose-dev(a)iam.unibe.ch
>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>
>>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>
>
> --
> www.tudorgirba.com
>
> "Every thing has its own flow"
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every thing has its own flow"
2:50 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
The method RTElement>>on:do: has been renamed RTElement>>when:do:
Alexandre
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
On Nov 6, 2014, at 10:01 AM, phil(a)highoctane.be wrote:
RTElement>>on:do: MNU
2:07 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
I commented out the click thing.
I got the view. Nice.
Now, another problem.
My package has a lot of tags in it. So, the package is too big to give
anything sensical in the UML view (very very wide picture).
I tried this:
(RPackageOrganizer default packageNamed: 'Blah-Webapplication')
definedClasses.
But of course, it doesn't work.
How is one getting classes from one tag, or more than one level?
Package tags are like: Blah-Webapplication-Parts,
Blah-Webapplication-Framework etc.
TIA
Phil
On Thu, Nov 6, 2014 at 1:15 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote:
Indeed. You need a fairly recent version of Roassal2 to get
RTUMLClassBuilder.
For a package, you can simply trigger it like this (inspect):
b := RTUMLClassBuilder new.
b addObjects: (RPackageOrganizer default packageNamed: 'AST-Core')
definedClasses.
b treeLayout.
b build.
b view
Cheers,
Doru
On Thu, Nov 6, 2014 at 12:55 PM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
> Do you have the latest version?
>
> Gofer new smalltalkhubUser: 'ObjectProfile' project: 'Roassal2';
package:
> 'ConfigurationOfRoassal2'; load. (Smalltalk at: #ConfigurationOfRoassal2)
> loadDevelopment
>
> On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <phil(a)highoctane.be>
> wrote:
>
>> Thx... Roassal2 is loaded in my image but there is no RTUMLClassBuilder
>> there.
>>
>>
>> [image: Inline image 1]
>>
>> Where can I get that?
>>
>> Phil
>>
>> On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
>>
>>> Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not
>>> sure by Pharo 3 compatibility but Roassal2 should work there.)
>>>
>>> Peter
>>>
>>> On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti <usman.bhatti(a)gmail.com>
>>> wrote:
>>>
>>>> I haven't seen support for UML class diagrams in a Pharo image yet.
>>>>
>>>> However, it is possible in Moose image.
>>>> Open MoosePanel, import your code in Moose (st icon on top right). One
>>>> model imported, All Model Classes-> right click -> UML Class
diagram.
>>>>
>>>> usman
>>>>
>>>> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <
>>>> phil(a)highoctane.be> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> I've got an image I develop in and would like to be able to
generate
>>>>> diagrams for a number of classes and relationships to explain how
things
>>>>> are working to other people.
>>>>>
>>>>> How can I do that with Moose? (Or GT I have loaded in 3.0)
>>>>>
>>>>> I have seen a couple diagrams floating around, so it is definitely
>>>>> possible to do.
>>>>>
>>>>> But I also saw that all of that was done in a Moose image and not in
>>>>> a normal Pharo image.
>>>>>
>>>>> TIA
>>>>> Phil
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Moose-dev mailing list
>>>>> Moose-dev(a)iam.unibe.ch
>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Moose-dev mailing list
>>>> Moose-dev(a)iam.unibe.ch
>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>
>>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
--
www.tudorgirba.com
"Every thing has its own flow"
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
2:29 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Hi,
To get the tags you can just send #classTags to the RPackage instance:
(RPackageOrganizer default packageNamed: 'Roassal2') classesForClassTag:
'Builder-UML'
Btw, if you load the latest version of GT-InspectorExtensions-Core, you
will get some presentations that might help navigating.
Cheers,
Doru
On Thu, Nov 6, 2014 at 2:07 PM, phil(a)highoctane.be <phil(a)highoctane.be>
wrote:
I commented out the click thing.
I got the view. Nice.
Now, another problem.
My package has a lot of tags in it. So, the package is too big to give
anything sensical in the UML view (very very wide picture).
I tried this:
(RPackageOrganizer default packageNamed: 'Blah-Webapplication')
definedClasses.
But of course, it doesn't work.
How is one getting classes from one tag, or more than one level?
Package tags are like: Blah-Webapplication-Parts,
Blah-Webapplication-Framework etc.
TIA
Phil
On Thu, Nov 6, 2014 at 1:15 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote:
> Indeed. You need a fairly recent version of Roassal2 to get
> RTUMLClassBuilder.
>
> For a package, you can simply trigger it like this (inspect):
> b := RTUMLClassBuilder new.
> b addObjects: (RPackageOrganizer default packageNamed: 'AST-Core')
> definedClasses.
> b treeLayout.
> b build.
> b view
>
> Cheers,
> Doru
>
> On Thu, Nov 6, 2014 at 12:55 PM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
>
>> Do you have the latest version?
>>
>> Gofer new smalltalkhubUser: 'ObjectProfile' project: 'Roassal2';
>> package: 'ConfigurationOfRoassal2'; load. (Smalltalk at:
>> #ConfigurationOfRoassal2) loadDevelopment
>>
>> On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <phil(a)highoctane.be>
>> wrote:
>>
>>> Thx... Roassal2 is loaded in my image but there is no RTUMLClassBuilder
>>> there.
>>>
>>>
>>> [image: Inline image 1]
>>>
>>> Where can I get that?
>>>
>>> Phil
>>>
>>> On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com>
wrote:
>>>
>>>> Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not
>>>> sure by Pharo 3 compatibility but Roassal2 should work there.)
>>>>
>>>> Peter
>>>>
>>>> On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti
<usman.bhatti(a)gmail.com>
>>>> wrote:
>>>>
>>>>> I haven't seen support for UML class diagrams in a Pharo image
yet.
>>>>>
>>>>> However, it is possible in Moose image.
>>>>> Open MoosePanel, import your code in Moose (st icon on top right).
>>>>> One model imported, All Model Classes-> right click -> UML
Class diagram.
>>>>>
>>>>> usman
>>>>>
>>>>> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <
>>>>> phil(a)highoctane.be> wrote:
>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> I've got an image I develop in and would like to be able to
generate
>>>>>> diagrams for a number of classes and relationships to explain how
things
>>>>>> are working to other people.
>>>>>>
>>>>>> How can I do that with Moose? (Or GT I have loaded in 3.0)
>>>>>>
>>>>>> I have seen a couple diagrams floating around, so it is
definitely
>>>>>> possible to do.
>>>>>>
>>>>>> But I also saw that all of that was done in a Moose image and not
in
>>>>>> a normal Pharo image.
>>>>>>
>>>>>> TIA
>>>>>> Phil
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Moose-dev mailing list
>>>>>> Moose-dev(a)iam.unibe.ch
>>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Moose-dev mailing list
>>>>> Moose-dev(a)iam.unibe.ch
>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Moose-dev mailing list
>>>> Moose-dev(a)iam.unibe.ch
>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>
>>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>
>
> --
> www.tudorgirba.com
>
> "Every thing has its own flow"
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Every thing has its own flow"
4:38 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Thanks you.
Got this working. It is cool.
b := RTUMLClassBuilder new.
package := RPackageOrganizer default packageNamed: 'MyTopLevelPackage'.
tags := package classTags.
objects := (tags collect: [ :t | package classesForClassTag: t name])
flatten.
b addObjects: objects.
b treeLayout.
b build.
b view
I do miss method categories. How is one visualizing that? All of my methods
are lumped up in a big pile. Is there any way I can get a kind of
compartment for each of them?
In the past, I tried out Dandelion tooling and there was an XMI export. Do
you have that somewhere in Moose?
Phil
On Thu, Nov 6, 2014 at 2:29 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote:
Hi,
To get the tags you can just send #classTags to the RPackage instance:
(RPackageOrganizer default packageNamed: 'Roassal2') classesForClassTag:
'Builder-UML'
Btw, if you load the latest version of GT-InspectorExtensions-Core, you
will get some presentations that might help navigating.
Cheers,
Doru
On Thu, Nov 6, 2014 at 2:07 PM, phil(a)highoctane.be <phil(a)highoctane.be>
wrote:
> I commented out the click thing.
> I got the view. Nice.
>
> Now, another problem.
>
> My package has a lot of tags in it. So, the package is too big to give
> anything sensical in the UML view (very very wide picture).
>
> I tried this:
>
> (RPackageOrganizer default packageNamed: 'Blah-Webapplication')
> definedClasses.
>
> But of course, it doesn't work.
>
> How is one getting classes from one tag, or more than one level?
>
> Package tags are like: Blah-Webapplication-Parts,
> Blah-Webapplication-Framework etc.
>
> TIA
> Phil
>
>
>
>
>
>
> On Thu, Nov 6, 2014 at 1:15 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote:
>
>> Indeed. You need a fairly recent version of Roassal2 to get
>> RTUMLClassBuilder.
>>
>> For a package, you can simply trigger it like this (inspect):
>> b := RTUMLClassBuilder new.
>> b addObjects: (RPackageOrganizer default packageNamed: 'AST-Core')
>> definedClasses.
>> b treeLayout.
>> b build.
>> b view
>>
>> Cheers,
>> Doru
>>
>> On Thu, Nov 6, 2014 at 12:55 PM, Peter Uhnák <i.uhnak(a)gmail.com> wrote:
>>
>>> Do you have the latest version?
>>>
>>> Gofer new smalltalkhubUser: 'ObjectProfile' project:
'Roassal2';
>>> package: 'ConfigurationOfRoassal2'; load. (Smalltalk at:
>>> #ConfigurationOfRoassal2) loadDevelopment
>>>
>>> On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <phil(a)highoctane.be
>>> > wrote:
>>>
>>>> Thx... Roassal2 is loaded in my image but there is no
>>>> RTUMLClassBuilder there.
>>>>
>>>>
>>>> [image: Inline image 1]
>>>>
>>>> Where can I get that?
>>>>
>>>> Phil
>>>>
>>>> On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com>
>>>> wrote:
>>>>
>>>>> Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not
>>>>> sure by Pharo 3 compatibility but Roassal2 should work there.)
>>>>>
>>>>> Peter
>>>>>
>>>>> On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti
<usman.bhatti(a)gmail.com
>>>>> > wrote:
>>>>>
>>>>>> I haven't seen support for UML class diagrams in a Pharo
image yet.
>>>>>>
>>>>>> However, it is possible in Moose image.
>>>>>> Open MoosePanel, import your code in Moose (st icon on top
right).
>>>>>> One model imported, All Model Classes-> right click -> UML
Class diagram.
>>>>>>
>>>>>> usman
>>>>>>
>>>>>> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <
>>>>>> phil(a)highoctane.be> wrote:
>>>>>>
>>>>>>> Hello,
>>>>>>>
>>>>>>> I've got an image I develop in and would like to be able
to
>>>>>>> generate diagrams for a number of classes and relationships
to explain how
>>>>>>> things are working to other people.
>>>>>>>
>>>>>>> How can I do that with Moose? (Or GT I have loaded in 3.0)
>>>>>>>
>>>>>>> I have seen a couple diagrams floating around, so it is
definitely
>>>>>>> possible to do.
>>>>>>>
>>>>>>> But I also saw that all of that was done in a Moose image and
not
>>>>>>> in a normal Pharo image.
>>>>>>>
>>>>>>> TIA
>>>>>>> Phil
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Moose-dev mailing list
>>>>>>> Moose-dev(a)iam.unibe.ch
>>>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Moose-dev mailing list
>>>>>> Moose-dev(a)iam.unibe.ch
>>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Moose-dev mailing list
>>>>> Moose-dev(a)iam.unibe.ch
>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Moose-dev mailing list
>>>> Moose-dev(a)iam.unibe.ch
>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>
>>>
>>
>>
>> --
>> www.tudorgirba.com
>>
>> "Every thing has its own flow"
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
--
www.tudorgirba.com
"Every thing has its own flow"
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
6:01 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Try this:
-=-=—=-=-=—=-=-=—=-=-=—=
classes := RTShape withAllSubclasses.
allMethodCategories := (classes flatCollect: #protocols) asSet asArray.
b := RTUMLClassBuilder new.
n := RTMultiLinearColorForIdentity new objects: allMethodCategories.
b methodShape label
color: [ :m | n rtValue: m protocol ].
b methodsNames: [ :cls | (cls methods sortedAs: #protocol) ].
b addObjects: classes.
b treeLayout.
b view setDefaultMenu.
b build.
b view
-=-=—=-=-=—=-=-=—=-=-=—=
Cheers,
Alexandre
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
On Nov 6, 2014, at 12:38 PM, phil(a)highoctane.be wrote:
Thanks you.
Got this working. It is cool.
b := RTUMLClassBuilder new.
package := RPackageOrganizer default packageNamed: 'MyTopLevelPackage'.
tags := package classTags.
objects := (tags collect: [ :t | package classesForClassTag: t name]) flatten.
b addObjects: objects.
b treeLayout.
b build.
b view
I do miss method categories. How is one visualizing that? All of my methods are lumped up
in a big pile. Is there any way I can get a kind of compartment for each of them?
In the past, I tried out Dandelion tooling and there was an XMI export. Do you have that
somewhere in Moose?
Phil
On Thu, Nov 6, 2014 at 2:29 PM, Tudor Girba <tudor(a)tudorgirba.com
<mailto:tudor@tudorgirba.com>> wrote:
Hi,
To get the tags you can just send #classTags to the RPackage instance:
(RPackageOrganizer default packageNamed: 'Roassal2') classesForClassTag:
'Builder-UML'
Btw, if you load the latest version of GT-InspectorExtensions-Core, you will get some
presentations that might help navigating.
Cheers,
Doru
On Thu, Nov 6, 2014 at 2:07 PM, phil(a)highoctane.be <mailto:phil@highoctane.be>
<phil(a)highoctane.be <mailto:phil@highoctane.be>> wrote:
I commented out the click thing.
I got the view. Nice.
Now, another problem.
My package has a lot of tags in it. So, the package is too big to give anything sensical
in the UML view (very very wide picture).
I tried this:
(RPackageOrganizer default packageNamed: 'Blah-Webapplication') definedClasses.
But of course, it doesn't work.
How is one getting classes from one tag, or more than one level?
Package tags are like: Blah-Webapplication-Parts, Blah-Webapplication-Framework etc.
TIA
Phil
On Thu, Nov 6, 2014 at 1:15 PM, Tudor Girba <tudor(a)tudorgirba.com
<mailto:tudor@tudorgirba.com>> wrote:
Indeed. You need a fairly recent version of Roassal2 to get RTUMLClassBuilder.
For a package, you can simply trigger it like this (inspect):
b := RTUMLClassBuilder new.
b addObjects: (RPackageOrganizer default packageNamed: 'AST-Core')
definedClasses.
b treeLayout.
b build.
b view
Cheers,
Doru
On Thu, Nov 6, 2014 at 12:55 PM, Peter Uhnák <i.uhnak(a)gmail.com
<mailto:i.uhnak@gmail.com>> wrote:
Do you have the latest version?
Gofer new smalltalkhubUser: 'ObjectProfile'
project: 'Roassal2';
package: 'ConfigurationOfRoassal2';
load.
(Smalltalk at: #ConfigurationOfRoassal2) loadDevelopment
On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <mailto:phil@highoctane.be>
<phil(a)highoctane.be <mailto:phil@highoctane.be>> wrote:
Thx... Roassal2 is loaded in my image but there is no RTUMLClassBuilder there.
<image.png>
Where can I get that?
Phil
On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com
<mailto:i.uhnak@gmail.com>> wrote:
Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not sure by Pharo 3
compatibility but Roassal2 should work there.)
Peter
On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti <usman.bhatti(a)gmail.com
<mailto:usman.bhatti@gmail.com>> wrote:
I haven't seen support for UML class diagrams in a Pharo image yet.
However, it is possible in Moose image.
Open MoosePanel, import your code in Moose (st icon on top right). One model imported,
All Model Classes-> right click -> UML Class diagram.
usman
On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <mailto:phil@highoctane.be>
<phil(a)highoctane.be <mailto:phil@highoctane.be>> wrote:
Hello,
I've got an image I develop in and would like to be able to generate diagrams for a
number of classes and relationships to explain how things are working to other people.
How can I do that with Moose? (Or GT I have loaded in 3.0)
I have seen a couple diagrams floating around, so it is definitely possible to do.
But I also saw that all of that was done in a Moose image and not in a normal Pharo
image.
TIA
Phil
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
--
www.tudorgirba.com <http://www.tudorgirba.com/>
"Every thing has its own flow"
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
--
www.tudorgirba.com <http://www.tudorgirba.com/>
"Every thing has its own flow"
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
6:23 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Nice.
Now, the RTMultiLinearColorForIdentity default is a bit difficult to
read/print. I have fiddled with it, works nicer now.
Is there any alternating palette possible?
Still, how can I have a separator between categories and the category name
in the list on top of the methods?
(Sorry to be asking but I've got to document a framework and this view is
really a huge timesaver).
Is there a way to do it left to right instead of top down?
I am used to dot, are there similar "cluster" abilities somewhere?
Would it be possible to put the package name somewhere in the top right of
the UML boxes (like small and italics?)
Ha, I am now very interested by this UMLView and Playground is much more
attractive :-D
Phil
On Thu, Nov 6, 2014 at 6:01 PM, Alexandre Bergel <alexandre.bergel(a)me.com>
wrote:
Try this:
-=-=—=-=-=—=-=-=—=-=-=—=
classes := RTShape withAllSubclasses.
allMethodCategories := (classes flatCollect: #protocols) asSet asArray.
b := RTUMLClassBuilder new.
n := RTMultiLinearColorForIdentity new objects: allMethodCategories.
b methodShape label
color: [ :m | n rtValue: m protocol ].
b methodsNames: [ :cls | (cls methods sortedAs: #protocol) ].
b addObjects: classes.
b treeLayout.
b view setDefaultMenu.
b build.
b view
-=-=—=-=-=—=-=-=—=-=-=—=
Cheers,
Alexandre
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
On Nov 6, 2014, at 12:38 PM, phil(a)highoctane.be wrote:
Thanks you.
Got this working. It is cool.
b := RTUMLClassBuilder new.
package := RPackageOrganizer default packageNamed: 'MyTopLevelPackage'.
tags := package classTags.
objects := (tags collect: [ :t | package classesForClassTag: t name])
flatten.
b addObjects: objects.
b treeLayout.
b build.
b view
I do miss method categories. How is one visualizing that? All of my
methods are lumped up in a big pile. Is there any way I can get a kind of
compartment for each of them?
In the past, I tried out Dandelion tooling and there was an XMI export. Do
you have that somewhere in Moose?
Phil
On Thu, Nov 6, 2014 at 2:29 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote:
> Hi,
>
> To get the tags you can just send #classTags to the RPackage instance:
> (RPackageOrganizer default packageNamed: 'Roassal2') classesForClassTag:
> 'Builder-UML'
>
> Btw, if you load the latest version of GT-InspectorExtensions-Core, you
> will get some presentations that might help navigating.
>
> Cheers,
> Doru
>
>
> On Thu, Nov 6, 2014 at 2:07 PM, phil(a)highoctane.be <phil(a)highoctane.be>
> wrote:
>
>> I commented out the click thing.
>> I got the view. Nice.
>>
>> Now, another problem.
>>
>> My package has a lot of tags in it. So, the package is too big to give
>> anything sensical in the UML view (very very wide picture).
>>
>> I tried this:
>>
>> (RPackageOrganizer default packageNamed: 'Blah-Webapplication')
>> definedClasses.
>>
>> But of course, it doesn't work.
>>
>> How is one getting classes from one tag, or more than one level?
>>
>> Package tags are like: Blah-Webapplication-Parts,
>> Blah-Webapplication-Framework etc.
>>
>> TIA
>> Phil
>>
>>
>>
>>
>>
>>
>> On Thu, Nov 6, 2014 at 1:15 PM, Tudor Girba <tudor(a)tudorgirba.com>
>> wrote:
>>
>>> Indeed. You need a fairly recent version of Roassal2 to get
>>> RTUMLClassBuilder.
>>>
>>> For a package, you can simply trigger it like this (inspect):
>>> b := RTUMLClassBuilder new.
>>> b addObjects: (RPackageOrganizer default packageNamed: 'AST-Core')
>>> definedClasses.
>>> b treeLayout.
>>> b build.
>>> b view
>>>
>>> Cheers,
>>> Doru
>>>
>>> On Thu, Nov 6, 2014 at 12:55 PM, Peter Uhnák <i.uhnak(a)gmail.com>
wrote:
>>>
>>>> Do you have the latest version?
>>>>
>>>> Gofer new smalltalkhubUser: 'ObjectProfile' project:
'Roassal2';
>>>> package: 'ConfigurationOfRoassal2'; load. (Smalltalk at:
>>>> #ConfigurationOfRoassal2) loadDevelopment
>>>>
>>>> On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <
>>>> phil(a)highoctane.be> wrote:
>>>>
>>>>> Thx... Roassal2 is loaded in my image but there is no
>>>>> RTUMLClassBuilder there.
>>>>>
>>>>>
>>>>> <image.png>
>>>>>
>>>>> Where can I get that?
>>>>>
>>>>> Phil
>>>>>
>>>>> On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák
<i.uhnak(a)gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Check out RTUMLClassBuilder in Roassal2, this is used by Moose.
>>>>>> (Not sure by Pharo 3 compatibility but Roassal2 should work
there.)
>>>>>>
>>>>>> Peter
>>>>>>
>>>>>> On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti <
>>>>>> usman.bhatti(a)gmail.com> wrote:
>>>>>>
>>>>>>> I haven't seen support for UML class diagrams in a Pharo
image yet.
>>>>>>>
>>>>>>> However, it is possible in Moose image.
>>>>>>> Open MoosePanel, import your code in Moose (st icon on top
right).
>>>>>>> One model imported, All Model Classes-> right click ->
UML Class diagram.
>>>>>>>
>>>>>>> usman
>>>>>>>
>>>>>>> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <
>>>>>>> phil(a)highoctane.be> wrote:
>>>>>>>
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> I've got an image I develop in and would like to be
able to
>>>>>>>> generate diagrams for a number of classes and
relationships to explain how
>>>>>>>> things are working to other people.
>>>>>>>>
>>>>>>>> How can I do that with Moose? (Or GT I have loaded in
3.0)
>>>>>>>>
>>>>>>>> I have seen a couple diagrams floating around, so it is
definitely
>>>>>>>> possible to do.
>>>>>>>>
>>>>>>>> But I also saw that all of that was done in a Moose image
and not
>>>>>>>> in a normal Pharo image.
>>>>>>>>
>>>>>>>> TIA
>>>>>>>> Phil
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Moose-dev mailing list
>>>>>>>> Moose-dev(a)iam.unibe.ch
>>>>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Moose-dev mailing list
>>>>>>> Moose-dev(a)iam.unibe.ch
>>>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Moose-dev mailing list
>>>>>> Moose-dev(a)iam.unibe.ch
>>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Moose-dev mailing list
>>>>> Moose-dev(a)iam.unibe.ch
>>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Moose-dev mailing list
>>>> Moose-dev(a)iam.unibe.ch
>>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> www.tudorgirba.com
>>>
>>> "Every thing has its own flow"
>>>
>>> _______________________________________________
>>> Moose-dev mailing list
>>> Moose-dev(a)iam.unibe.ch
>>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>>
>>>
>>
>> _______________________________________________
>> Moose-dev mailing list
>> Moose-dev(a)iam.unibe.ch
>> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>>
>>
>
>
> --
> www.tudorgirba.com
>
> "Every thing has its own flow"
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
8:29 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
Hi Phil,
Now, the RTMultiLinearColorForIdentity default is a bit difficult to
read/print. I have fiddled with it, works nicer now.
Is there any alternating palette possible?
Yes, you can specify any color palettes to RTMultiLinearColorForIdentity. There is also
Palette, which has some nice and harmonic colors. But you can always choose a different
one.
Still, how can I have a separator between categories and the category
name in the list on top of the methods?
(Sorry to be asking but I've got to document a framework and this view is really a
huge timesaver).
Is there a way to do it left to right instead of top down?
Looks interesting, but this is a significant work for us to do (a couple of hours). I can
allocate an engineering task force if some resources are available. Else, feel free to ask
questions, and we will try to help you :-)
I am used to dot, are there similar "cluster" abilities
somewhere?
Yes, you can use RTNest, but probably the builder has to be adapted
Would it be possible to put the package name somewhere in the top
right of the UML boxes (like small and italics?)
It is indeed feasible yes.
Ha, I am now very interested by this UMLView and Playground is much
more attractive :-D
Cool :-)
Alexandre
On Thu, Nov 6, 2014 at 6:01 PM, Alexandre Bergel <alexandre.bergel(a)me.com
<mailto:alexandre.bergel@me.com>> wrote:
Try this:
-=-=—=-=-=—=-=-=—=-=-=—=
classes := RTShape withAllSubclasses.
allMethodCategories := (classes flatCollect: #protocols) asSet asArray.
b := RTUMLClassBuilder new.
n := RTMultiLinearColorForIdentity new objects: allMethodCategories.
b methodShape label
color: [ :m | n rtValue: m protocol ].
b methodsNames: [ :cls | (cls methods sortedAs: #protocol) ].
b addObjects: classes.
b treeLayout.
b view setDefaultMenu.
b build.
b view
-=-=—=-=-=—=-=-=—=-=-=—=
<Screen Shot 2014-11-06 at 2.00.43 PM.png>
Cheers,
Alexandre
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu <http://www.bergel.eu/>
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
> On Nov 6, 2014, at 12:38 PM, phil(a)highoctane.be <mailto:phil@highoctane.be>
wrote:
>
> Thanks you.
>
> Got this working. It is cool.
>
> b := RTUMLClassBuilder new.
> package := RPackageOrganizer default packageNamed: 'MyTopLevelPackage'.
> tags := package classTags.
> objects := (tags collect: [ :t | package classesForClassTag: t name]) flatten.
>
> b addObjects: objects.
> b treeLayout.
> b build.
> b view
>
> I do miss method categories. How is one visualizing that? All of my methods are
lumped up in a big pile. Is there any way I can get a kind of compartment for each of
them?
>
> In the past, I tried out Dandelion tooling and there was an XMI export. Do you have
that somewhere in Moose?
>
> Phil
>
>
> On Thu, Nov 6, 2014 at 2:29 PM, Tudor Girba <tudor(a)tudorgirba.com
<mailto:tudor@tudorgirba.com>> wrote:
> Hi,
>
> To get the tags you can just send #classTags to the RPackage instance:
> (RPackageOrganizer default packageNamed: 'Roassal2') classesForClassTag:
'Builder-UML'
>
> Btw, if you load the latest version of GT-InspectorExtensions-Core, you will get some
presentations that might help navigating.
>
> Cheers,
> Doru
>
>
> On Thu, Nov 6, 2014 at 2:07 PM, phil(a)highoctane.be <mailto:phil@highoctane.be>
<phil(a)highoctane.be <mailto:phil@highoctane.be>> wrote:
> I commented out the click thing.
> I got the view. Nice.
>
> Now, another problem.
>
> My package has a lot of tags in it. So, the package is too big to give anything
sensical in the UML view (very very wide picture).
>
> I tried this:
>
> (RPackageOrganizer default packageNamed: 'Blah-Webapplication')
definedClasses.
>
> But of course, it doesn't work.
>
> How is one getting classes from one tag, or more than one level?
>
> Package tags are like: Blah-Webapplication-Parts, Blah-Webapplication-Framework etc.
>
> TIA
> Phil
>
>
>
>
>
>
> On Thu, Nov 6, 2014 at 1:15 PM, Tudor Girba <tudor(a)tudorgirba.com
<mailto:tudor@tudorgirba.com>> wrote:
> Indeed. You need a fairly recent version of Roassal2 to get RTUMLClassBuilder.
>
> For a package, you can simply trigger it like this (inspect):
> b := RTUMLClassBuilder new.
> b addObjects: (RPackageOrganizer default packageNamed: 'AST-Core')
definedClasses.
> b treeLayout.
> b build.
> b view
>
> Cheers,
> Doru
>
> On Thu, Nov 6, 2014 at 12:55 PM, Peter Uhnák <i.uhnak(a)gmail.com
<mailto:i.uhnak@gmail.com>> wrote:
> Do you have the latest version?
>
> Gofer new smalltalkhubUser: 'ObjectProfile'
> project: 'Roassal2';
> package: 'ConfigurationOfRoassal2';
> load.
> (Smalltalk at: #ConfigurationOfRoassal2) loadDevelopment
>
> On Thu, Nov 6, 2014 at 12:37 PM, phil(a)highoctane.be <mailto:phil@highoctane.be>
<phil(a)highoctane.be <mailto:phil@highoctane.be>> wrote:
> Thx... Roassal2 is loaded in my image but there is no RTUMLClassBuilder there.
>
>
> <image.png>
>
> Where can I get that?
>
> Phil
>
> On Thu, Nov 6, 2014 at 11:42 AM, Peter Uhnák <i.uhnak(a)gmail.com
<mailto:i.uhnak@gmail.com>> wrote:
> Check out RTUMLClassBuilder in Roassal2, this is used by Moose. (Not sure by Pharo 3
compatibility but Roassal2 should work there.)
>
> Peter
>
> On Thu, Nov 6, 2014 at 11:10 AM, Usman Bhatti <usman.bhatti(a)gmail.com
<mailto:usman.bhatti@gmail.com>> wrote:
> I haven't seen support for UML class diagrams in a Pharo image yet.
>
> However, it is possible in Moose image.
> Open MoosePanel, import your code in Moose (st icon on top right). One model
imported, All Model Classes-> right click -> UML Class diagram.
>
> usman
>
> On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <mailto:phil@highoctane.be>
<phil(a)highoctane.be <mailto:phil@highoctane.be>> wrote:
> Hello,
>
> I've got an image I develop in and would like to be able to generate diagrams for
a number of classes and relationships to explain how things are working to other people.
>
> How can I do that with Moose? (Or GT I have loaded in 3.0)
>
> I have seen a couple diagrams floating around, so it is definitely possible to do.
>
> But I also saw that all of that was done in a Moose image and not in a normal Pharo
image.
>
> TIA
> Phil
>
>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
>
>
>
>
> --
> www.tudorgirba.com <http://www.tudorgirba.com/>
>
> "Every thing has its own flow"
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
>
>
>
>
> --
> www.tudorgirba.com <http://www.tudorgirba.com/>
>
> "Every thing has its own flow"
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch <mailto:Moose-dev@iam.unibe.ch>
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<https://www.iam.unibe.ch/mailman/listinfo/moose-dev>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
8:26 p.m.
New subject: How to make a UML diagram of a package developed in Pharo3?
I do it all in 3.0 with GT loaded ans RT dev.
Works
Le 6 nov. 2014 11:10, "Usman Bhatti" <usman.bhatti(a)gmail.com> a écrit :
I haven't seen support for UML class diagrams in a Pharo image
yet.
However, it is possible in Moose image.
Open MoosePanel, import your code in Moose (st icon on top right). One
model imported, All Model Classes-> right click -> UML Class diagram.
usman
On Thu, Nov 6, 2014 at 10:34 AM, phil(a)highoctane.be <phil(a)highoctane.be>
wrote:
> Hello,
>
> I've got an image I develop in and would like to be able to generate
> diagrams for a number of classes and relationships to explain how things
> are working to other people.
>
> How can I do that with Moose? (Or GT I have loaded in 3.0)
>
> I have seen a couple diagrams floating around, so it is definitely
> possible to do.
>
> But I also saw that all of that was done in a Moose image and not in a
> normal Pharo image.
>
> TIA
> Phil
>
>
>
>
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
3322
days inactive
3322
days old
15 comments
5 participants
participants (5)
-
Alexandre Bergel -
Peter Uhnák -
phil＠highoctane.be -
Tudor Girba -
Usman Bhatti