Hi all,
I'd like to customize lines with arrows a little bit more than seems to be possible out of the box at the moment and am looking for some pointers.
I have attached a screenshot to explain what I'd like to achieve.
I'd like to be able to:
1. Define a certain distance from the arrows beginning and end to the objects they are attached to - so they are not directly 'glued' to the objects. 2. Make lines wider, without just affecting the width of the line (and in the same extend the line the arrow is made up), but instead it should scale to nice looking arrows. 3. To place lines besides each other from and to the same object.
Are some of these points already possible but I missed them? How would I best go on about modifying, extending Roassal to allow for edge styling in this way?
Cheers, Dennis
Hi Dennis,
This should be easy to achieve. Create a subclass of ROLine, override lineSegmentsFor: and drawOnFor:
In the implementation of the lines, drawOnFor: does not use lineSegmentsFor:, however it should. My advice is therefore try to keep drawOnFor: as simple as possible, by calling lineSegmentsFor:
lineSegmentsFor: is intended to return a collection of points to draw lines. Give a try, it should not be that hard. We could do a remote pair programming if you want (my MSN id is godfroy_bern@hotmail.com).
Cheers, Alexandre
On Sep 12, 2012, at 8:07 AM, Dennis Schenk d.schenk@students.unibe.ch wrote:
Hi all,
I'd like to customize lines with arrows a little bit more than seems to be possible out of the box at the moment and am looking for some pointers.
I have attached a screenshot to explain what I'd like to achieve.
I'd like to be able to: • Define a certain distance from the arrows beginning and end to the objects they are attached to - so they are not directly 'glued' to the objects. • Make lines wider, without just affecting the width of the line (and in the same extend the line the arrow is made up), but instead it should scale to nice looking arrows. • To place lines besides each other from and to the same object. Are some of these points already possible but I missed them? How would I best go on about modifying, extending Roassal to allow for edge styling in this way?
Cheers, Dennis <roassal-arrows.png>_______________________________________________ Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Hi Alex,
I worked on the arrows and lines. See the following Screenshot: http://cl.ly/image/1t2Z461a3k0n.
The arrows are attached with a ROShorterDistanceAttachPoint but the lines leave a certain gap to the attach point. Also I removed the bottom line of the arrows. For this particular visualization I also used some 'visual weighting' to draw the arrows (using opacity and width).
I did not yet implement my new line class exactly as as you suggested yet, does not yet use lineSegmentsFor:, I only using drawOnFor: at the moment) will refactor that soon though.
While looking at the lines and arrow classes I saw some code duplication in ROAbstractArrow. I refactored the methods
- drawOn: aCanvas for: anEdge fromPoint: fromPoint toPoint: toPoint line: line and - drawOn: aCanvas for: anEdge line: line
Here is the corresponding .st file: http://cl.ly/code/1r2g2c303w0F. If you agree with the change, you could add it to Roassal.
Will keep you updated about my progress with the arrows and lines.
Cheers, Dennis
On Wed, Sep 12, 2012 at 1:49 PM, Alexandre Bergel alexandre.bergel@me.comwrote:
Hi Dennis,
This should be easy to achieve. Create a subclass of ROLine, override lineSegmentsFor: and drawOnFor:
In the implementation of the lines, drawOnFor: does not use lineSegmentsFor:, however it should. My advice is therefore try to keep drawOnFor: as simple as possible, by calling lineSegmentsFor:
lineSegmentsFor: is intended to return a collection of points to draw lines. Give a try, it should not be that hard. We could do a remote pair programming if you want (my MSN id is godfroy_bern@hotmail.com).
Cheers, Alexandre
On Sep 12, 2012, at 8:07 AM, Dennis Schenk d.schenk@students.unibe.ch wrote:
Hi all,
I'd like to customize lines with arrows a little bit more than seems to
be possible out of the box at the moment and am looking for some pointers.
I have attached a screenshot to explain what I'd like to achieve.
I'd like to be able to: • Define a certain distance from the arrows beginning and end to
the objects they are attached to - so they are not directly 'glued' to the objects.
• Make lines wider, without just affecting the width of the line(and in the same extend the line the arrow is made up), but instead it should scale to nice looking arrows.
• To place lines besides each other from and to the same object.Are some of these points already possible but I missed them? How would I best go on about modifying, extending Roassal to allow for
edge styling in this way?
Cheers, Dennis <roassal-arrows.png>_______________________________________________ Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Nice :). Thanks for the effort.
Doru
On Wed, Sep 19, 2012 at 10:44 AM, Dennis Schenk d.schenk@students.unibe.ch wrote:
Hi Alex,
I worked on the arrows and lines. See the following Screenshot: http://cl.ly/image/1t2Z461a3k0n.
The arrows are attached with a ROShorterDistanceAttachPoint but the lines leave a certain gap to the attach point. Also I removed the bottom line of the arrows. For this particular visualization I also used some 'visual weighting' to draw the arrows (using opacity and width).
I did not yet implement my new line class exactly as as you suggested yet, does not yet use lineSegmentsFor:, I only using drawOnFor: at the moment) will refactor that soon though.
While looking at the lines and arrow classes I saw some code duplication in ROAbstractArrow. I refactored the methods
- drawOn: aCanvas for: anEdge fromPoint: fromPoint toPoint: toPoint line:
line and
- drawOn: aCanvas for: anEdge line: line
Here is the corresponding .st file: http://cl.ly/code/1r2g2c303w0F. If you agree with the change, you could add it to Roassal.
Will keep you updated about my progress with the arrows and lines.
Cheers, Dennis
On Wed, Sep 12, 2012 at 1:49 PM, Alexandre Bergel alexandre.bergel@me.com wrote:
Hi Dennis,
This should be easy to achieve. Create a subclass of ROLine, override lineSegmentsFor: and drawOnFor:
In the implementation of the lines, drawOnFor: does not use lineSegmentsFor:, however it should. My advice is therefore try to keep drawOnFor: as simple as possible, by calling lineSegmentsFor:
lineSegmentsFor: is intended to return a collection of points to draw lines. Give a try, it should not be that hard. We could do a remote pair programming if you want (my MSN id is godfroy_bern@hotmail.com).
Cheers, Alexandre
On Sep 12, 2012, at 8:07 AM, Dennis Schenk d.schenk@students.unibe.ch wrote:
Hi all,
I'd like to customize lines with arrows a little bit more than seems to be possible out of the box at the moment and am looking for some pointers.
I have attached a screenshot to explain what I'd like to achieve.
I'd like to be able to: • Define a certain distance from the arrows beginning and end to the objects they are attached to - so they are not directly 'glued' to the objects. • Make lines wider, without just affecting the width of the line (and in the same extend the line the arrow is made up), but instead it should scale to nice looking arrows. • To place lines besides each other from and to the same object. Are some of these points already possible but I missed them? How would I best go on about modifying, extending Roassal to allow for edge styling in this way?
Cheers, Dennis <roassal-arrows.png>_______________________________________________ Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
I worked on the arrows and lines. See the following Screenshot: http://cl.ly/image/1t2Z461a3k0n.
Gorgeous!
While looking at the lines and arrow classes I saw some code duplication in ROAbstractArrow. I refactored the methods
- drawOn: aCanvas for: anEdge fromPoint: fromPoint toPoint: toPoint line: line
and
- drawOn: aCanvas for: anEdge line: line
Here is the corresponding .st file: http://cl.ly/code/1r2g2c303w0F. If you agree with the change, you could add it to Roassal.
Will keep you updated about my progress with the arrows and lines.
Yes, it is in version 1.124
Cheers, Alexandre
On Wed, Sep 12, 2012 at 1:49 PM, Alexandre Bergel alexandre.bergel@me.com wrote: Hi Dennis,
This should be easy to achieve. Create a subclass of ROLine, override lineSegmentsFor: and drawOnFor:
In the implementation of the lines, drawOnFor: does not use lineSegmentsFor:, however it should. My advice is therefore try to keep drawOnFor: as simple as possible, by calling lineSegmentsFor:
lineSegmentsFor: is intended to return a collection of points to draw lines. Give a try, it should not be that hard. We could do a remote pair programming if you want (my MSN id is godfroy_bern@hotmail.com).
Cheers, Alexandre
On Sep 12, 2012, at 8:07 AM, Dennis Schenk d.schenk@students.unibe.ch wrote:
Hi all,
I'd like to customize lines with arrows a little bit more than seems to be possible out of the box at the moment and am looking for some pointers.
I have attached a screenshot to explain what I'd like to achieve.
I'd like to be able to: • Define a certain distance from the arrows beginning and end to the objects they are attached to - so they are not directly 'glued' to the objects. • Make lines wider, without just affecting the width of the line (and in the same extend the line the arrow is made up), but instead it should scale to nice looking arrows. • To place lines besides each other from and to the same object. Are some of these points already possible but I missed them? How would I best go on about modifying, extending Roassal to allow for edge styling in this way?
Cheers, Dennis <roassal-arrows.png>_______________________________________________ Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Moose-dev mailing list Moose-dev@iam.unibe.ch https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-
Alexandre Bergel -
Dennis Schenk -
Mircea Filip Lungu -
Tudor Girba