3 May
2012
3 May
'12
12:57 a.m.
Hi,
I'm working with EyeSee to create some charts in Moose but unfortunately I
haven't been able to create multiple lines in a single line chart, is this
possible? and if so does anyone have some sample code to share?
Thanks.
Franco
3 May
3 May
10:36 a.m.
Hi
I don't have access to an image now to send you code but you can have a
look into the class ESExamples. There are several examples there.
Regards,
On May 3, 2012 12:59 AM, "Franco Sabadini" <fsabadi(a)gmail.com> wrote:
Hi,
I'm working with EyeSee to create some charts in Moose but unfortunately I
haven't been able to create multiple lines in a single line chart, is this
possible? and if so does anyone have some sample code to share?
Thanks.
Franco
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
9 May
9 May
12:18 a.m.
Hi,
You can do that using a compositeDiagram. Below you can check a simple
example:
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
regularAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3.
^ compDiag open
regards,
On Thu, May 3, 2012 at 10:36 AM, Andre Hora <andrehoraa(a)gmail.com> wrote:
Hi
I don't have access to an image now to send you code but you can have a
look into the class ESExamples. There are several examples there.
Regards,
On May 3, 2012 12:59 AM, "Franco Sabadini" <fsabadi(a)gmail.com> wrote:
> Hi,
>
> I'm working with EyeSee to create some charts in Moose but unfortunately
> I haven't been able to create multiple lines in a single line chart, is
> this possible? and if so does anyone have some sample code to share?
>
> Thanks.
>
>
> Franco
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
--
Andre Hora
4:41 a.m.
Andre,
Thank you so much for your help!
We are gonna try with that...
Regards,
Juan
On Tue, May 8, 2012 at 7:18 PM, Andre Hora <andrehoraa(a)gmail.com> wrote:
Hi,
You can do that using a compositeDiagram. Below you can check a simple
example:
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
regularAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3.
^ compDiag open
regards,
On Thu, May 3, 2012 at 10:36 AM, Andre Hora <andrehoraa(a)gmail.com> wrote:
Hi
I don't have access to an image now to send you code but you can have a
look into the class ESExamples. There are several examples there.
Regards,
On May 3, 2012 12:59 AM, "Franco Sabadini" <fsabadi(a)gmail.com> wrote:
> Hi,
>
> I'm working with EyeSee to create some charts in Moose but unfortunately
> I haven't been able to create multiple lines in a single line chart, is
> this possible? and if so does anyone have some sample code to share?
>
> Thanks.
>
>
> Franco
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
>
--
Andre Hora
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
7:49 a.m.
Thanks for taking care of this, Andre.
Doru
On 9 May 2012, at 00:18, Andre Hora wrote:
Hi,
You can do that using a compositeDiagram. Below you can check a simple example:
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
regularAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3.
^ compDiag open
regards,
On Thu, May 3, 2012 at 10:36 AM, Andre Hora <andrehoraa(a)gmail.com> wrote:
Hi
I don't have access to an image now to send you code but you can have a look into the
class ESExamples. There are several examples there.
Regards,
On May 3, 2012 12:59 AM, "Franco Sabadini" <fsabadi(a)gmail.com> wrote:
Hi,
I'm working with EyeSee to create some charts in Moose but unfortunately I
haven't been able to create multiple lines in a single line chart, is this possible?
and if so does anyone have some sample code to share?
Thanks.
Franco
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
<Screen shot 2012-05-09 at 12.19.40
AM.png>_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"There are no old things, there are only old ways of looking at them."
15 May
15 May
12:19 a.m.
On Tue, May 8, 2012 at 3:18 PM, Andre Hora <andrehoraa(a)gmail.com> wrote:
Hi,
[cut]
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
[cut]
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
[snip]
Careful with this! the labels only apply to the first data set (the
red one) - if you look at the second data set where the max value is
43, you'll notice it corresponds to 35 in the diagram; and if you look
at the third data set (blue) with a max value of 25, you'll also not
that this corresponds to 35 in the diagram.
So, each data set is scaled to fit on the diagram, but doesn't change
the range...
-Chris
12:40 a.m.
On Tue, May 15, 2012 at 12:19 AM, Chris Cunningham
<cunningham.cb(a)gmail.com>wrote;wrote:
On Tue, May 8, 2012 at 3:18 PM, Andre Hora
<andrehoraa(a)gmail.com> wrote:
Indeed, and to avoid that one can use the "preferredAxisMaxY:"
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
valueAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
Hi,
[cut]
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
[cut]
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
[snip]
Careful with this! the labels only apply to the first data set (the
red one) - if you look at the second data set where the max value is
43, you'll notice it corresponds to 35 in the diagram; and if you look
at the third data set (blue) with a max value of 25, you'll also not
that this corresponds to 35 in the diagram.
So, each data set is scaled to fit on the diagram, but doesn't change
the range...
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
1 a.m.
On Mon, May 14, 2012 at 3:40 PM, Andre Hora <andrehoraa(a)gmail.com> wrote:
On Tue, May 15, 2012 at 12:19 AM, Chris Cunningham <cunningham.cb(a)gmail.com>
wrote:
Yes, that is nice. However, when I run it (using the latest
ConfigurationOfEyeSee loadDefault), I get different labels - one label
for every value, which is undesirable. In a different test with a max
Y value of 16,000, it is unreadable and incredibly slow.
This is from an Seaside oneclick 3.0.6, based on Pharo 1.3, I believe.
-Chris
On Tue, May 8, 2012 at 3:18 PM, Andre Hora <andrehoraa(a)gmail.com> wrote:
Indeed, and to avoid that one can use the "preferredAxisMaxY:"
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
valueAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
Hi,
[cut]
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
[cut]
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
[snip]
Careful with this! the labels only apply to the first data set (the
red one) - if you look at the second data set where the max value is
43, you'll notice it corresponds to 35 in the diagram; and if you look
at the third data set (blue) with a max value of 25, you'll also not
that this corresponds to 35 in the diagram.
So, each data set is scaled to fit on the diagram, but doesn't change
the range...
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
1:06 a.m.
On Mon, May 14, 2012 at 4:00 PM, Chris Cunningham
<cunningham.cb(a)gmail.com> wrote:
On Mon, May 14, 2012 at 3:40 PM, Andre Hora
<andrehoraa(a)gmail.com> wrote:
Never mind - I had missed that you changed the first axis call from
#regularAxis to #valueAxis - with that, the axis numbers are
reasonable - and it doesn't cause the image to come to a virtual
standstill.
That said, is there a way to force regular axis on this diagram?
Could I get a label every every 10 multiple, plus say the 45 as well?
-Chris
On Tue, May 15, 2012 at 12:19 AM, Chris Cunningham <cunningham.cb(a)gmail.com>
wrote:
Yes, that is nice. However, when I run it (using the latest
ConfigurationOfEyeSee loadDefault), I get different labels - one label
for every value, which is undesirable. In a different test with a max
Y value of 16,000, it is unreadable and incredibly slow.
This is from an Seaside oneclick 3.0.6, based on Pharo 1.3, I believe.
-Chris
On Tue, May 8, 2012 at 3:18 PM, Andre Hora <andrehoraa(a)gmail.com> wrote:
Indeed, and to avoid that one can use the "preferredAxisMaxY:"
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
valueAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
Hi,
[cut]
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
[cut]
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
[snip]
Careful with this! the labels only apply to the first data set (the
red one) - if you look at the second data set where the max value is
43, you'll notice it corresponds to 35 in the diagram; and if you look
at the third data set (blue) with a max value of 25, you'll also not
that this corresponds to 35 in the diagram.
So, each data set is scaled to fit on the diagram, but doesn't change
the range...
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
11:02 a.m.
On Tue, May 15, 2012 at 1:06 AM, Chris Cunningham
<cunningham.cb(a)gmail.com>wrote;wrote:
On Mon, May 14, 2012 at 4:00 PM, Chris Cunningham
<cunningham.cb(a)gmail.com> wrote:
Yes, that is nice. However, when I run it (using the latest
ConfigurationOfEyeSee loadDefault), I get different labels - one label
for every value, which is undesirable. In a different test with a max
Y value of 16,000, it is unreadable and incredibly slow.
This is from an Seaside oneclick 3.0.6, based on Pharo 1.3, I believe.
-Chris
Never mind - I had missed that you changed the first axis call from
#regularAxis to #valueAxis - with that, the axis numbers are
reasonable - and it doesn't cause the image to come to a virtual
standstill.
That said, is there a way to force regular axis on this diagram?
Could I get a label every every 10 multiple, plus say the 45 as well?
Chris, if you download the last EyeSee the regular axis (#regularAxis) will
work fine. It automatically creates the steps size, instead of step 1.
Below you can check the code:
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
regularAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
On Mon, May 14, 2012 at 3:40 PM, Andre Hora
<andrehoraa(a)gmail.com>
wrote:
>
>
> On Tue, May 15, 2012 at 12:19 AM, Chris Cunningham <
cunningham.cb(a)gmail.com>
> wrote:
>>
>> On Tue, May 8, 2012 at 3:18 PM, Andre Hora <andrehoraa(a)gmail.com>
wrote:
> Hi,
>
[cut]
>
> model1 := #(30 29 25 31 28 24 22 26).
> model2 := #(14 24 21 11 22 13 43 21).
> model3 := #(0 20 25 14 18 12 12 15).
>
[cut]
> diag2 := (ESDiagramRenderer new lineDiagram)
> y: #yourself;
> defaultColor: Color green;
> models: model2;
> yourself.
>
> diag3 := (ESDiagramRenderer new lineDiagram)
> y: #yourself;
> defaultColor: Color blue;
> models: model3;
> yourself.
>
[snip]
Careful with this! the labels only apply to the first data set (the
red one) - if you look at the second data set where the max value is
43, you'll notice it corresponds to 35 in the diagram; and if you look
at the third data set (blue) with a max value of 25, you'll also not
that this corresponds to 35 in the diagram.
So, each data set is scaled to fit on the diagram, but doesn't change
the range...
Indeed, and to avoid that one can use the "preferredAxisMaxY:"
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
valueAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
11:14 a.m.
Excellent!
Thanks for taking care of this, Andre.
Doru
On Tue, May 15, 2012 at 11:02 AM, Andre Hora <andrehoraa(a)gmail.com> wrote:
On Tue, May 15, 2012 at 1:06 AM, Chris Cunningham <cunningham.cb(a)gmail.com>
wrote:
--
www.tudorgirba.com
"Every thing has its own flow"
On Mon, May 14, 2012 at 4:00 PM, Chris Cunningham
<cunningham.cb(a)gmail.com> wrote:
Chris, if you download the last EyeSee the regular axis (#regularAxis) will
work fine. It automatically creates the steps size, instead of step 1.
Below you can check the code:
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
regularAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
On Mon, May 14, 2012 at 3:40 PM, Andre Hora
<andrehoraa(a)gmail.com>
wrote:
Never mind - I had missed that you changed the first axis call from
#regularAxis to #valueAxis - with that, the axis numbers are
reasonable - and it doesn't cause the image to come to a virtual
standstill.
That said, is there a way to force regular axis on this diagram?
Could I get a label every every 10 multiple, plus say the 45 as well?
On Tue, May 15, 2012 at 12:19 AM, Chris Cunningham
<cunningham.cb(a)gmail.com>
wrote:
>
> On Tue, May 8, 2012 at 3:18 PM, Andre Hora <andrehoraa(a)gmail.com>
> wrote:
> > Hi,
> >
> [cut]
> >
> > model1 := #(30 29 25 31 28 24 22 26).
> > model2 := #(14 24 21 11 22 13 43 21).
> > model3 := #(0 20 25 14 18 12 12 15).
> >
> [cut]
> > diag2 := (ESDiagramRenderer new lineDiagram)
> > y: #yourself;
> > defaultColor: Color green;
> > models: model2;
> > yourself.
> >
> > diag3 := (ESDiagramRenderer new lineDiagram)
> > y: #yourself;
> > defaultColor: Color blue;
> > models: model3;
> > yourself.
> >
> [snip]
>
> Careful with this! the labels only apply to the first data set (the
> red one) - if you look at the second data set where the max value is
> 43, you'll notice it corresponds to 35 in the diagram; and if you look
> at the third data set (blue) with a max value of 25, you'll also not
> that this corresponds to 35 in the diagram.
>
> So, each data set is scaled to fit on the diagram, but doesn't change
> the range...
Indeed, and to avoid that one can use the "preferredAxisMaxY:"
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
valueAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
>
> -Chris
>
> _______________________________________________
> Moose-dev mailing list
> Moose-dev(a)iam.unibe.ch
> https://www.iam.unibe.ch/mailman/listinfo/moose-dev
>
--
Andre Hora
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Yes, that is nice. However, when I run it (using the latest
ConfigurationOfEyeSee loadDefault), I get different labels - one label
for every value, which is undesirable. In a different test with a max
Y value of 16,000, it is unreadable and incredibly slow.
This is from an Seaside oneclick 3.0.6, based on Pharo 1.3, I believe.
-Chris
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
10:15 p.m.
On Tue, May 15, 2012 at 2:02 AM, Andre Hora <andrehoraa(a)gmail.com> wrote:
Chris, if you download the last EyeSee the regular axis (#regularAxis) will
work fine. It automatically creates the steps size, instead of step 1.
Below you can check the code:
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
regularAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
Andre,
That does look good. Which repository is the latest stored in?
-Chris
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
10:53 p.m.
EyeSee in squeaksource.
On May 15, 2012 10:16 PM, "Chris Cunningham" <cunningham.cb(a)gmail.com>
wrote:
On Tue, May 15, 2012 at 2:02 AM, Andre Hora
<andrehoraa(a)gmail.com> wrote:
Chris, if you download the last EyeSee the regular axis (#regularAxis)
will
work fine. It automatically creates the steps
size, instead of step 1.
Below you can check the code:
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
regularAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
Andre,
That does look good. Which repository is the latest stored in?
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
17 May
17 May
3:58 a.m.
Thanks a lot Andre this works great :).
Take care.
Franco
On Tue, May 15, 2012 at 5:53 PM, Andre Hora <andrehoraa(a)gmail.com> wrote:
EyeSee in squeaksource.
On May 15, 2012 10:16 PM, "Chris Cunningham" <cunningham.cb(a)gmail.com>
wrote:
On Tue, May 15, 2012 at 2:02 AM, Andre Hora
<andrehoraa(a)gmail.com> wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
Chris, if you download the last EyeSee the regular axis (#regularAxis)
will
work fine. It automatically creates the steps
size, instead of step 1.
Below you can check the code:
lineBarCompositeDiagram2
"self new lineBarCompositeDiagram2"
| diag1 diag2 diag3 compDiag model1 model2 model3 |
model1 := #(30 29 25 31 28 24 22 26).
model2 := #(14 24 21 11 22 13 43 21).
model3 := #(0 20 25 14 18 12 12 15).
diag1 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
models: model1;
regularAxis;
defaultColor: Color red;
yourself.
diag2 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color green;
models: model2;
yourself.
diag3 := (ESDiagramRenderer new lineDiagram)
y: #yourself;
defaultColor: Color blue;
models: model3;
yourself.
compDiag := ESDiagramRenderer new.
(compDiag compositeDiagram)
add: diag1;
add: diag2;
add: diag3;
preferredAxisMaxY: 45.
^ compDiag open
Andre,
That does look good. Which repository is the latest stored in?
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
-Chris
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Andre Hora
4384
days inactive
4399
days old
13 comments
5 participants
participants (5)
-
Andre Hora -
Chris Cunningham -
Franco Sabadini -
Juan Francisco Hurtado -
Tudor Girba