11 Oct
2011
11 Oct
'11
3:28 p.m.
Hi,
It looks like there are some 67 test failures in Moose :).
They are most likely due to the changes in the annotations, like Fabrizio mentioned.
Could someone fix them? :)
Cheers,
Doru
Begin forwarded message:
From: admin(a)moosetechnology.org
Subject: Jenkins build is unstable: moose-latest-dev #637
Date: 11 October 2011 15:25:21 CEST
To: tudor(a)tudorgirba.com, simon.denier(a)gmail.com, cy.delaunay(a)gmail.com,
alexandre(a)bergel.eu, stephane.ducasse(a)inria.fr, jannik.laval(a)gmail.com
See <http://hudson.moosetechnology.org/job/moose-latest-dev/637/>
--
www.tudorgirba.com
"Speaking louder won't make the point worthier."
11 Oct
11 Oct
3:33 p.m.
New subject: Jenkins build is unstable: moose-latest-dev #637
Hi Doru,
since i can do that. I will start immediately.
Cheers,
Fabrizio
On 11 Oct 2011, at 15:28, Tudor Girba wrote:
Hi,
It looks like there are some 67 test failures in Moose :).
They are most likely due to the changes in the annotations, like Fabrizio mentioned.
Could someone fix them? :)
Cheers,
Doru
Begin forwarded message:
From: admin(a)moosetechnology.org
Subject: Jenkins build is unstable: moose-latest-dev #637
Date: 11 October 2011 15:25:21 CEST
To: tudor(a)tudorgirba.com, simon.denier(a)gmail.com, cy.delaunay(a)gmail.com,
alexandre(a)bergel.eu, stephane.ducasse(a)inria.fr, jannik.laval(a)gmail.com
See <http://hudson.moosetechnology.org/job/moose-latest-dev/637/>
--
www.tudorgirba.com
"Speaking louder won't make the point worthier."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
3:40 p.m.
New subject: Jenkins build is unstable: moose-latest-dev #637
Excellent!
Thanks,
Doru
On 11 Oct 2011, at 15:33, Fabrizio Perin wrote:
Hi Doru,
since i can do that. I will start immediately.
Cheers,
Fabrizio
On 11 Oct 2011, at 15:28, Tudor Girba wrote:
--
www.tudorgirba.com
"If you interrupt the barber while he is cutting your hair,
you will end up with a messy haircut."
Hi,
It looks like there are some 67 test failures in Moose :).
They are most likely due to the changes in the annotations, like Fabrizio mentioned.
Could someone fix them? :)
Cheers,
Doru
Begin forwarded message:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev From: admin(a)moosetechnology.org
Subject: Jenkins build is unstable: moose-latest-dev #637
Date: 11 October 2011 15:25:21 CEST
To: tudor(a)tudorgirba.com, simon.denier(a)gmail.com, cy.delaunay(a)gmail.com,
alexandre(a)bergel.eu, stephane.ducasse(a)inria.fr, jannik.laval(a)gmail.com
See <http://hudson.moosetechnology.org/job/moose-latest-dev/637/>
--
www.tudorgirba.com
"Speaking louder won't make the point worthier."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
4:04 p.m.
New subject: Jenkins build is unstable: moose-latest-dev #637
in a method like this:
numberOfLinesOfText
<MSEProperty: #numberOfLinesOfText type: #Number>
<MSEComment: 'Number of lines of text which are not empty in a file '>
^self lookUpPropertyNamed: #LOT computedAs: [self totalNumberOfLinesOfText - self
numberOfEmptyLinesOfText]
Also #LOT should be changed in numberOfLinesOfText right?
Cheers,
Fabrizio
On 11 Oct 2011, at 15:40, Tudor Girba wrote:
Excellent!
Thanks,
Doru
On 11 Oct 2011, at 15:33, Fabrizio Perin wrote:
Hi Doru,
since i can do that. I will start immediately.
Cheers,
Fabrizio
On 11 Oct 2011, at 15:28, Tudor Girba wrote:
--
www.tudorgirba.com
"If you interrupt the barber while he is cutting your hair,
you will end up with a messy haircut."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi,
It looks like there are some 67 test failures in Moose :).
They are most likely due to the changes in the annotations, like Fabrizio mentioned.
Could someone fix them? :)
Cheers,
Doru
Begin forwarded message:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev From: admin(a)moosetechnology.org
Subject: Jenkins build is unstable: moose-latest-dev #637
Date: 11 October 2011 15:25:21 CEST
To: tudor(a)tudorgirba.com, simon.denier(a)gmail.com, cy.delaunay(a)gmail.com,
alexandre(a)bergel.eu, stephane.ducasse(a)inria.fr, jannik.laval(a)gmail.com
See <http://hudson.moosetechnology.org/job/moose-latest-dev/637/>
--
www.tudorgirba.com
"Speaking louder won't make the point worthier."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
4:22 p.m.
New subject: Jenkins build is unstable: moose-latest-dev #637
Another question:
basically all the Fuel tests end with an error because of a division by zero in this
method:
relativeImportanceForSystem
<MSEProperty: #relativeImportanceForSystem type: #Number>
<MSEComment: 'The number of client packages normalized by the total number of
packages'>
^ self lookUpPropertyNamed: #PRIS
computedAs: [ self numberOfClientPackages / (self mooseModel allModelPackages size -
1)]
Something else changed lately that can make (self mooseModel allModelPackages size - 1) =
0?
Cheers,
Fabrizio
5:18 p.m.
New subject: Jenkins build is unstable: moose-latest-dev #637
made green some tests. I still cannot figure out Why The Fuel tests are failing. Besides
my changes to the properties, the #relativeImportanceForSystem method did not change
lately.
Fabrizio Perin
Institut fuer Mathematik und Informatik
University Bern, IAM-SCG
Neubrueckstrasse 10
CH-3012 Bern, Switzerland
Tel: +41 31 511 76 36
FAX: +41 31 631 33 55
On 11 Oct 2011, at 16:22, Fabrizio Perin wrote:
Another question:
basically all the Fuel tests end with an error because of a division by zero in this
method:
relativeImportanceForSystem
<MSEProperty: #relativeImportanceForSystem type: #Number>
<MSEComment: 'The number of client packages normalized by the total number of
packages'>
^ self lookUpPropertyNamed: #PRIS
computedAs: [ self numberOfClientPackages / (self mooseModel allModelPackages size -
1)]
Something else changed lately that can make (self mooseModel allModelPackages size - 1)
= 0?
Cheers,
Fabrizio
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
5:55 p.m.
New subject: Jenkins build is unstable: moose-latest-dev #637
Hi,
Yes.
Doru
On 11 Oct 2011, at 16:04, Fabrizio Perin wrote:
in a method like this:
numberOfLinesOfText
<MSEProperty: #numberOfLinesOfText type: #Number>
<MSEComment: 'Number of lines of text which are not empty in a file '>
^self lookUpPropertyNamed: #LOT computedAs: [self totalNumberOfLinesOfText - self
numberOfEmptyLinesOfText]
Also #LOT should be changed in numberOfLinesOfText right?
Cheers,
Fabrizio
On 11 Oct 2011, at 15:40, Tudor Girba wrote:
--
www.tudorgirba.com
"Beauty is where we see it."
Excellent!
Thanks,
Doru
On 11 Oct 2011, at 15:33, Fabrizio Perin wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi Doru,
since i can do that. I will start immediately.
Cheers,
Fabrizio
On 11 Oct 2011, at 15:28, Tudor Girba wrote:
--
www.tudorgirba.com
"If you interrupt the barber while he is cutting your hair,
you will end up with a messy haircut."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi,
It looks like there are some 67 test failures in Moose :).
They are most likely due to the changes in the annotations, like Fabrizio mentioned.
Could someone fix them? :)
Cheers,
Doru
Begin forwarded message:
> From: admin(a)moosetechnology.org
> Subject: Jenkins build is unstable: moose-latest-dev #637
> Date: 11 October 2011 15:25:21 CEST
> To: tudor(a)tudorgirba.com, simon.denier(a)gmail.com, cy.delaunay(a)gmail.com,
alexandre(a)bergel.eu, stephane.ducasse(a)inria.fr, jannik.laval(a)gmail.com
>
> See <http://hudson.moosetechnology.org/job/moose-latest-dev/637/>
>
>
--
www.tudorgirba.com
"Speaking louder won't make the point worthier."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
5:56 p.m.
New subject: Jenkins build is unstable: moose-latest-dev #637
Is it because the model has only one package? :)
In any case, the metric should have a check for size = 1.
Cheers,
Doru
On 11 Oct 2011, at 16:22, Fabrizio Perin wrote:
Another question:
basically all the Fuel tests end with an error because of a division by zero in this
method:
relativeImportanceForSystem
<MSEProperty: #relativeImportanceForSystem type: #Number>
<MSEComment: 'The number of client packages normalized by the total number of
packages'>
^ self lookUpPropertyNamed: #PRIS
computedAs: [ self numberOfClientPackages / (self mooseModel allModelPackages size -
1)]
Something else changed lately that can make (self mooseModel allModelPackages size - 1)
= 0?
Cheers,
Fabrizio
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Beauty is where we see it."
6:24 p.m.
New subject: Jenkins build is unstable: moose-latest-dev #637
Of course that is the reason but what changed the model? Before the tests were green so
the model changed or the importer of the model changed.
I will add the check something like:
> self lookUpPropertyNamed: #PRIS
> computedAs: [
(self mooseModel allModelPackages size > 1)
ifFalse: [0]
ifTrue:[
> self numberOfClientPackages / (self
mooseModel allModelPackages size - 1)]
]
it is fine?
Cheers,
Fabrizio
On 11 Oct 2011, at 17:56, Tudor Girba wrote:
Is it because the model has only one package? :)
In any case, the metric should have a check for size = 1.
Cheers,
Doru
On 11 Oct 2011, at 16:22, Fabrizio Perin wrote:
Another question:
basically all the Fuel tests end with an error because of a division by zero in this
method:
relativeImportanceForSystem
<MSEProperty: #relativeImportanceForSystem type: #Number>
<MSEComment: 'The number of client packages normalized by the total number of
packages'>
^ self lookUpPropertyNamed: #PRIS
computedAs: [ self numberOfClientPackages / (self mooseModel allModelPackages size -
1)]
Something else changed lately that can make (self mooseModel allModelPackages size - 1)
= 0?
Cheers,
Fabrizio
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
www.tudorgirba.com
"Beauty is where we see it."
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
4596
days inactive
4596
days old
8 comments
2 participants
participants (2)
-
Fabrizio Perin -
Tudor Girba