23 Sep
2010
23 Sep
'10
11:07 a.m.
On 23 sept. 2010, at 10:30, Mariano Martinez Peck wrote:
Hi Folks...Sorry for the "urgen" but I got
an idea for my paper with deadline tomorro hahahahah
I was using DistributionMaps where the containers were packages for example, elements
classes, and properties the amount of instances. For example, see the attached
screenshot.
Now....it is difficult to find the classes with most instances since I need to search for
an specific color.
I am not sure I understand what it is difficult:
- because the mapping color <-> range does not match your expectations (like red
would be highest, blue would be lowest)
- or because you are looking for one class with the most instances
- or because you want to compare the real values, not ranges.
I thoguht that having someting like CodeCity can be interesting. I would like:
- EAch building (square) is a container -> package
- Each little squeare (that has heigh) is a element -> class
- The heigh is a property, in this case, the amount of instances for example.
Then I can easily see packages/classes with several intances easily (the highest ones).
So...is that possible? how easier? :)
Right now I was doing my DM something like this:
I checked for *City* class in Moose 4.1 but I didn't find anything :(
The only thing I found was this link: http://www.moosetechnology.org/tools/vw/codecity
Thanks for any help
Mariano
<amuntUsedInstances.png>_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Simon
23 Sep
23 Sep
11:13 a.m.
New subject: Urget question about CodeCity
On Thu, Sep 23, 2010 at 11:07 AM, Simon Denier <Simon.Denier(a)inria.fr>wrote;wrote:
On 23 sept. 2010, at 10:30, Mariano Martinez Peck wrote:
Hi Folks...Sorry for the "urgen" but I got an idea for my paper with
deadline tomorro hahahahah
I was using DistributionMaps where the containers were packages for
example, elements classes, and properties the amount of instances. For
example, see the attached screenshot.
Now....it is difficult to find the classes with most instances since I need
to search for an specific color.
I am not sure I understand what it is difficult:
hi
- because the mapping color <-> range does not
match your expectations
(like red would be highest, blue would be lowest)
I guess because of this one. For example, take a look to the screenshot I
attached. If I want to search the most instantiated classes, I should serach
colors like Brown or Pink. But they are not easily shown....and of course, I
have lot of colors...then I can to go with my "eye" looking carefully each
package and looking for those colors.
This is why I thoguht that CodeCity would be cool, in the sense that for
this case it would be easier since the property would represent the height
of a building...and it is easier to notice heigh than a color.
I am trying now LinearDistributionMap and I think it can help :)
- or because you are looking for one class with the
most instances
- or because you want to compare the real values, not ranges.
I thoguht that having someting like CodeCity can be interesting. I would
like:
- EAch building (square) is a container -> package
- Each little squeare (that has heigh) is a element -> class
- The heigh is a property, in this case, the amount of instances for
example.
Then I can easily see packages/classes with several intances easily (the
highest ones).
So...is that possible? how easier? :)
Right now I was doing my DM something like this:
I checked for *City* class in Moose 4.1 but I didn't find anything :(
The only thing I found was this link:
http://www.moosetechnology.org/tools/vw/codecity
Thanks for any help
Mariano
<amuntUsedInstances.png>_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Simon
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
2:18 p.m.
New subject: Urget question about CodeCity
Hi Mariano,
If you think the colors are not easily pinpointing the highest values, then play with both
the hue and the brightness of the color.
In CodeCity's age maps, I use a color range from a light yellow (for small values of
the metric, in my case the age) to dark blue (for the highest values). This will allow you
to quickly spot the darkest parts in the system, which would correspond to the highest
values. Look at the screenshot, I guess it shouldn't be too difficult to obtain
something similar in Mondrian.
Cheers,
Ricky
1
2
3
4
5
6
7
8
On Sep 23, 2010, at 11:13 AM, Mariano Martinez Peck wrote:
On Thu, Sep 23, 2010 at 11:07 AM, Simon Denier <Simon.Denier(a)inria.fr> wrote:
On 23 sept. 2010, at 10:30, Mariano Martinez Peck wrote:
Hi Folks...Sorry for the "urgen" but I
got an idea for my paper with deadline tomorro hahahahah
I was using DistributionMaps where the containers were packages for example, elements
classes, and properties the amount of instances. For example, see the attached
screenshot.
Now....it is difficult to find the classes with most instances since I need to search for
an specific color.
I am not sure I understand what it is difficult:
hi
- because the mapping color <-> range does not match your expectations (like red
would be highest, blue would be lowest)
I guess because of this one. For example, take a look to the screenshot I attached. If I
want to search the most instantiated classes, I should serach colors like Brown or Pink.
But they are not easily shown....and of course, I have lot of colors...then I can to go
with my "eye" looking carefully each package and looking for those colors.
This is why I thoguht that CodeCity would be cool, in the sense that for this case it
would be easier since the property would represent the height of a building...and it is
easier to notice heigh than a color.
I am trying now LinearDistributionMap and I think it can help :)
- or because you are looking for one class with the most instances
- or because you want to compare the real values, not ranges.
I thoguht that having someting like CodeCity can be interesting. I would like:
- EAch building (square) is a container -> package
- Each little squeare (that has heigh) is a element -> class
- The heigh is a property, in this case, the amount of instances for example.
Then I can easily see packages/classes with several intances easily (the highest ones).
So...is that possible? how easier? :)
Right now I was doing my DM something like this:
I checked for *City* class in Moose 4.1 but I didn't find anything :(
The only thing I found was this link: http://www.moosetechnology.org/tools/vw/codecity
Thanks for any help
Mariano
<amuntUsedInstances.png>_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Simon
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<ATT00001..txt> 
11:39 p.m.
New subject: Urget question about CodeCity
Thanks Ricky for sharing your experience.
Alexandre
On 23 Sep 2010, at 08:18, Richard Wettel wrote:
Hi Mariano,
If you think the colors are not easily pinpointing the highest values, then play with
both the hue and the brightness of the color.
In CodeCity's age maps, I use a color range from a light yellow (for small values of
the metric, in my case the age) to dark blue (for the highest values). This will allow you
to quickly spot the darkest parts in the system, which would correspond to the highest
values. Look at the screenshot, I guess it shouldn't be too difficult to obtain
something similar in Mondrian.
Cheers,
Ricky
1
2
3
4
5
6
7
8
On Sep 23, 2010, at 11:13 AM, Mariano Martinez Peck wrote:
--
_,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:
Alexandre Bergel http://www.bergel.eu
^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.
On Thu, Sep 23, 2010 at 11:07 AM, Simon Denier <Simon.Denier(a)inria.fr> wrote:
On 23 sept. 2010, at 10:30, Mariano Martinez Peck wrote:
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev Hi Folks...Sorry for the "urgen" but I
got an idea for my paper with deadline tomorro hahahahah
I was using DistributionMaps where the containers were packages for example, elements
classes, and properties the amount of instances. For example, see the attached
screenshot.
Now....it is difficult to find the classes with most instances since I need to search for
an specific color.
I am not sure I understand what it is difficult:
hi
- because the mapping color <-> range does not match your expectations (like red
would be highest, blue would be lowest)
I guess because of this one. For example, take a look to the screenshot I attached. If I
want to search the most instantiated classes, I should serach colors like Brown or Pink.
But they are not easily shown....and of course, I have lot of colors...then I can to go
with my "eye" looking carefully each package and looking for those colors.
This is why I thoguht that CodeCity would be cool, in the sense that for this case it
would be easier since the property would represent the height of a building...and it is
easier to notice heigh than a color.
I am trying now LinearDistributionMap and I think it can help :)
- or because you are looking for one class with the most instances
- or because you want to compare the real values, not ranges.
I thoguht that having someting like CodeCity can be interesting. I would like:
- EAch building (square) is a container -> package
- Each little squeare (that has heigh) is a element -> class
- The heigh is a property, in this case, the amount of instances for example.
Then I can easily see packages/classes with several intances easily (the highest ones).
So...is that possible? how easier? :)
Right now I was doing my DM something like this:
I checked for *City* class in Moose 4.1 but I didn't find anything :(
The only thing I found was this link: http://www.moosetechnology.org/tools/vw/codecity
Thanks for any help
Mariano
<amuntUsedInstances.png>_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Simon
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<ATT00001..txt>
28 Sep
28 Sep
11:03 p.m.
New subject: Urget question about CodeCity
On Thu, Sep 23, 2010 at 2:18 PM, Richard Wettel <richard.wettel(a)usi.ch>wrote;wrote:
Hi Mariano,
If you think the colors are not easily pinpointing the highest values, then
play with both the hue and the brightness of the color.
In CodeCity's age maps, I use a color range from a light yellow (for small
values of the metric, in my case the age) to dark blue (for the highest
values). This will allow you to quickly spot the darkest parts in the
system, which would correspond to the highest values. Look at the
screenshot, I guess it shouldn't be too difficult to obtain something
similar in Mondrian.
Thanks to everybody for the fast answers I got that day. I finally did
something like this. Settings specific colors.
Cheers
Mariano
Cheers,
Ricky
1
2
3
4
5
6
7
8
On Sep 23, 2010, at 11:13 AM, Mariano Martinez Peck wrote:
On Thu, Sep 23, 2010 at 11:07 AM, Simon Denier <Simon.Denier(a)inria.fr>wrote;wrote:
On 23 sept. 2010, at 10:30, Mariano Martinez Peck wrote:
Hi Folks...Sorry for the "urgen" but I got an idea for my paper with
deadline tomorro hahahahah
I was using DistributionMaps where the containers were packages for
example, elements classes, and properties the amount of instances. For
example, see the attached screenshot.
Now....it is difficult to find the classes with most instances since I
need to search for an specific color.
I am not sure I understand what it is difficult:
hi
- because the mapping color <-> range does
not match your expectations
(like red would be highest, blue would be lowest)
I guess because of this one. For example, take a look to the screenshot I
attached. If I want to search the most instantiated classes, I should serach
colors like Brown or Pink. But they are not easily shown....and of course, I
have lot of colors...then I can to go with my "eye" looking carefully each
package and looking for those colors.
This is why I thoguht that CodeCity would be cool, in the sense that for
this case it would be easier since the property would represent the height
of a building...and it is easier to notice heigh than a color.
I am trying now LinearDistributionMap and I think it can help :)
- or because you are looking for one class with
the most instances
- or because you want to compare the real values, not ranges.
I thoguht that having someting like CodeCity can be interesting. I would
like:
- EAch building (square) is a container -> package
- Each little squeare (that has heigh) is a element -> class
- The heigh is a property, in this case, the amount of instances for
example.
Then I can easily see packages/classes with several intances easily (the
highest ones).
So...is that possible? how easier? :)
Right now I was doing my DM something like this:
I checked for *City* class in Moose 4.1 but I didn't find anything :(
The only thing I found was this link:
http://www.moosetechnology.org/tools/vw/codecity
Thanks for any help
Mariano
<amuntUsedInstances.png>_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
--
Simon
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
<ATT00001..txt>
_______________________________________________
Moose-dev mailing list
Moose-dev(a)iam.unibe.ch
https://www.iam.unibe.ch/mailman/listinfo/moose-dev
4959
days inactive
4964
days old
4 comments
4 participants
participants (4)
-
Alexandre Bergel -
Mariano Martinez Peck -
Richard Wettel -
Simon Denier