3 Feb
2014
3 Feb
'14
11:20 a.m.
Hi all,
I tried to load Pier3 into a fresh Pharo image using:
Gofer new
url: 'http://smalltalkhub.com/mc/Pier/Pier3/main';
package: 'ConfigurationOfPier3';
load.
(Smalltalk at: #ConfigurationOfPier3) load
Note that this does not load Pier-Seaside.
This loading failed due to the following error: (while loading:
'Pier-Pharo-Persistency')
'This package depends on the following classes:
PRWidget
You must resolve these dependencies before you will be able to load these definitions:
PRExportImportWidget
groupLabel
isAbstract
label
export:
exporterImporter
exporterImporter:
exporterImporterClass
exporterImporterClass:
import:into:
initialize
renderContentOn:
renderExportOn:
renderImportOn:
renderSelectOn:
replace
replace:
'
When I take a Pier3 image from the build server, it appears that PRWidget is in
Pier-Seaside. Also this stuff is not loaded (the warning is ignored somewhere!). So this
should be moved to a different package, with a dependency on Pier-Seaside and
Pier-Pharo-Persistency.
Cheers,
Diego
4 Feb
4 Feb
5:09 p.m.
On Mon, Feb 3, 2014 at 11:20 AM, Diego Lont <diego.lont(a)delware.nl> wrote:
When I take a Pier3 image from the build server, it
appears that PRWidget
is in Pier-Seaside. Also this stuff is not loaded (the warning is ignored
somewhere!). So this should be moved to a different package, with a
dependency on Pier-Seaside and Pier-Pharo-Persistency.
can you please fix the configuration?
--
Damien Cassou
http://damiencassou.seasidehosting.st
"Success is the ability to go from one failure to another without losing
enthusiasm."
Winston Churchill
5 Feb
5 Feb
11:02 a.m.
Hi Damien,
I moved the class that gave trouble to Pier-Pharo-Seaside. And it now loads fine.
I also tried loading version '3.1.0' and it looks like the configuration works
fine for this, but it gives me some strange layout when I test the website: it displays
some html tag's, instead of setting the proper div classes. Can you take a look at
this? Because it seems to have a connection with Pillar,
Diego
On Feb 4, 2014, at 5:09 PM, Damien Cassou wrote:
On Mon, Feb 3, 2014 at 11:20 AM, Diego Lont <diego.lont(a)delware.nl> wrote:
When I take a Pier3 image from the build server, it appears that PRWidget is in
Pier-Seaside. Also this stuff is not loaded (the warning is ignored somewhere!). So this
should be moved to a different package, with a dependency on Pier-Seaside and
Pier-Pharo-Persistency.
can you please fix the configuration?
--
Damien Cassou
http://damiencassou.seasidehosting.st
"Success is the ability to go from one failure to another without losing
enthusiasm."
Winston Churchill
_______________________________________________
Magritte, Pier and Related Tools ...
https://www.iam.unibe.ch/mailman/listinfo/smallwiki
11:29 a.m.
Hi Damien,
I took a look into why it went wrong, and I found that you have renamed PRVerbatim into
PRRaw (why?) and missed the implementation in Pier-Seaside.
If you do changes like this, will you please check with the Seaside part as well? Also
please keep in mind that Pier-Seaside is cross platform, and should stay cross platform.
So your changes in Pillar also should work on other platforms as well.
Regards,
Diego
On Feb 5, 2014, at 11:02 AM, Diego Lont wrote:
Hi Damien,
I moved the class that gave trouble to Pier-Pharo-Seaside. And it now loads fine.
I also tried loading version '3.1.0' and it looks like the configuration works
fine for this, but it gives me some strange layout when I test the website: it displays
some html tag's, instead of setting the proper div classes. Can you take a look at
this? Because it seems to have a connection with Pillar,
Diego
On Feb 4, 2014, at 5:09 PM, Damien Cassou wrote:
On Mon, Feb 3, 2014 at 11:20 AM, Diego Lont <diego.lont(a)delware.nl> wrote:
When I take a Pier3 image from the build server, it appears that PRWidget is in
Pier-Seaside. Also this stuff is not loaded (the warning is ignored somewhere!). So this
should be moved to a different package, with a dependency on Pier-Seaside and
Pier-Pharo-Persistency.
can you please fix the configuration?
--
Damien Cassou
http://damiencassou.seasidehosting.st
"Success is the ability to go from one failure to another without losing
enthusiasm."
Winston Churchill
_______________________________________________
Magritte, Pier and Related Tools ...
https://www.iam.unibe.ch/mailman/listinfo/smallwiki
_______________________________________________
Magritte, Pier and Related Tools ...
https://www.iam.unibe.ch/mailman/listinfo/smallwiki
3:18 p.m.
On Wed, Feb 5, 2014 at 11:29 AM, Diego Lont <diego.lont(a)delware.nl> wrote:
I took a look into why it went wrong, and I found that
you have renamed
PRVerbatim into PRRaw (why?) and missed the implementation in Pier-Seaside.
I did that after a discussion with my colleagues where it appeared
that the name PRRaw was easier to understand than PRVerbatim.
If you do changes like this, will you please check
with the Seaside part as
well?
I'm subscribed to jenkins jobs and I get messages when a build fails.
I fixed them a hundred times already. This time, no job failed. And I
don't really use Pier so I can't know.
Also please keep in mind that Pier-Seaside is cross
platform, and
should stay cross platform. So your changes in Pillar also should work on
other platforms as well.
Agree. Are there any continuous integration job that would tell me
when I go wrong?
Talking about jobs, it looks like there is a problem with the
dependency to Seaside:
https://ci.inria.fr/pharo-contribution/job/Pier3/PHARO=20,VERSION=stable,VM…
--
Damien Cassou
http://damiencassou.seasidehosting.st
"Success is the ability to go from one failure to another without
losing enthusiasm."
Winston Churchill
7 Feb
7 Feb
11:01 a.m.
New subject: Fixing Pier3Addons
Hi all,
I am currently fixing the configuration of Pier 3 Add ons.
One of the main trouble I have is that there are version conflicts of the things that are
used. So I am now also updating some other configurations (i.e. Magritte and Pillar), to
get it working together. I notice that there are a lot of different strategies to specify
versions. I use the following (and will modify all configuration I need to change
accordingly):
- baselines
Packages: No version specified, only dependencies.
Project: #'stable'
- development versions:
Packages: This is the latest version. Personally I think it is easier to leave them out,
as this will automatically load the latest version. But most of the time this is filled
out as: 'this belongs together'.
Projects same team: #'development'
Used projects: #'stable'.
- stable versions / release versions
Packages: Specified. This is only allowed to allow for bug fixes.
Projects same team: #'stable'.
Used project: Specified. When releasing, check the stable version.
Also I try to make as few exceptions as possible for other platforms, so if I can specify
something for pharo instead of pharo2.x and pharo3.x I will do so.
I hope I will not cause too much inconvenience.
Cheers,
Diego
5:07 p.m.
New subject: Fixing Pier3Addons
On Fri, Feb 7, 2014 at 11:01 AM, Diego Lont <diego.lont(a)delware.nl> wrote:
I hope I will not cause too much inconvenience.
you should not worry, we can fix things if they break. Go ahead, thanks Diego.
--
Damien Cassou
http://damiencassou.seasidehosting.st
"Success is the ability to go from one failure to another without
losing enthusiasm."
Winston Churchill
3971
days inactive
3975
days old
6 comments
2 participants
participants (2)
-
Damien Cassou -
Diego Lont